S5GCE, was: Beyond S5R6

Forums › Cruncher's Corner

archae86
archae86
Joined: 6 Dec 05
Posts: 3161
Credit: 7262955135
RAC: 1559034

RE: Still the point

13 Apr 2010 18:42:08 UTC
Message 96863 in response to message 96861
(moderation:
    )

    Quote:
    Still the point remains, even my current dual core 64 bit is under performing due to software limitations.

    Is that really so clear? The one really clear-cut advantage of 64-bit operation is large address range for single segments. But as that limitation is already well past a gigabyte in 32-bit implementations, it is not actually so very common just yet for that advantage to apply at the application level (you already get the benefit of being allowed to install larger physical RAM than 4 G regardless).

    The 32 vs. 64-bit choice does not affect the format options for floating point. Indeed the 80-bit floating point representation supported by the original 8087 (which indeed is the direct progenitor of the IEEE floating point spec) is not only adequate, but considered overkill for most real-world floating point work--and that was available for 16-bit software on the 8086 by the early 1980s.

    M. Schmitt
    M. Schmitt
    Joined: 27 Jun 05
    Posts: 478
    Credit: 15872262
    RAC: 0

    RE: S5GCE allways end with

    13 Apr 2010 19:19:56 UTC
    Message 96864 in response to message 96858
    (moderation:
      )

      Quote:
      S5GCE allways end with Compute error on both my machines (tasks 170334428, 170524895, 170556252, 170531847, 170451886, 170439512, 170439508). With similar message in kernel log file:
      kernel: grsec: (default:D:/) denied load of writable library /SYSV01022003 by /var/lib/boinc/projects/einstein.phys.uwm.edu/einstein_S5GCE_1.04_i686-pc-linux-gnu__S5GCESSE2[einstein_S5GCE_:26521] uid/euid:114/114 gid/egid:1022/1022, parent /usr/bin/boinc_client[boinc_client:11869] uid/euid:114/114 gid/egid:1022/1022


      Hm, don't know about grseced kernels, but it could be the libs(which lib?) should not be writable for your boinc user.
      If I do a ldd on the einstein apps, I don't get dependencies on other but system libs. So what is '/SYSV01022003'?

      Quote:

      Arecibo tasks finnishing successfully.

      Both machines running on grsec patched linux-2.6.33

      It's possible compute only Arecibo tasks during problem with S5GCE will be solved?


      Without some "dirty" tricks: No

      martin
      martin
      Joined: 3 Apr 10
      Posts: 5
      Credit: 4908716
      RAC: 0

      RE: RE: S5GCE allways

      17 Apr 2010 14:15:03 UTC
      Message 96865 in response to message 96864
      (moderation:
        )

        Quote:
        Quote:
        S5GCE allways end with Compute error on both my machines (tasks 170334428, 170524895, 170556252, 170531847, 170451886, 170439512, 170439508). With similar message in kernel log file:
        kernel: grsec: (default:D:/) denied load of writable library /SYSV01022003 by /var/lib/boinc/projects/einstein.phys.uwm.edu/einstein_S5GCE_1.04_i686-pc-linux-gnu__S5GCESSE2[einstein_S5GCE_:26521] uid/euid:114/114 gid/egid:1022/1022, parent /usr/bin/boinc_client[boinc_client:11869] uid/euid:114/114 gid/egid:1022/1022

        Hm, don't know about grseced kernels, but it could be the libs(which lib?) should not be writable for your boinc user.
        If I do a ldd on the einstein apps, I don't get dependencies on other but system libs. So what is '/SYSV01022003'?

        Recompilation of glibc solved problem with messages from grsec. But S5GCE tasks still fail.

        So 17. apríl 2010, 12:04:21 CEST Einstein@Home Starting h1_0444.15_S5R4__207_S5GCEa_1
        So 17. apríl 2010, 12:04:21 CEST Einstein@Home Starting task h1_0444.15_S5R4__207_S5GCEa_1 using einstein_S5GCE version 104
        So 17. apríl 2010, 12:05:03 CEST Einstein@Home Sending scheduler request: To fetch work.
        So 17. apríl 2010, 12:05:03 CEST Einstein@Home Requesting new tasks
        So 17. apríl 2010, 12:05:08 CEST Einstein@Home Scheduler request completed: got 0 new tasks
        So 17. apríl 2010, 12:05:08 CEST Einstein@Home Message from server: BOINC will delete file h1_0393.95_S5R7 when no longer needed
        So 17. apríl 2010, 12:05:08 CEST Einstein@Home Got server request to delete file h1_0393.95_S5R7
        So 17. apríl 2010, 15:20:55 CEST Einstein@Home Computation for task h1_0444.15_S5R4__207_S5GCEa_1 finished
        So 17. apríl 2010, 15:20:55 CEST Einstein@Home Output file h1_0444.15_S5R4__207_S5GCEa_1_0 for task h1_0444.15_S5R4__207_S5GCEa_1 absent
        So 17. apríl 2010, 16:05:09 CEST Einstein@Home Sending scheduler request: To fetch work.

        boinc user has write premissions to directory projects/einstein.phys.uwm.edu/

        Gundolf Jahn
        Gundolf Jahn
        Joined: 1 Mar 05
        Posts: 1079
        Credit: 341280
        RAC: 0

        RE: Recompilation of glibc

        17 Apr 2010 14:58:49 UTC
        Message 96866 in response to message 96865
        (moderation:
          )

          Quote:
          Recompilation of glibc solved problem with messages from grsec. But S5GCE tasks still fail.


          Task h1_0444.15_S5R4__207_S5GCEa_1_0 ended with

          ERROR: Stepped outside the coarse grid! 
2010-04-17 15:20:52.3172 (912) [CRITICAL]: ERROR: MAIN() returned with error '13'

          but many of the other tasks got

          APP DEBUG: Application caught signal 8.

          FPU status word ffff80c1, flags: ERR_SUMM STACK_FAULT INVALID

          which points to problems with kernel configuration option CONFIG_PREEMPT.

          I did a google search for "Application caught signal 8" and found [url=http://old.nabble.com/CONFIG_PREEMPT-causes-corruption-of-application's-FPU-stack-td17293854.htm]CONFIG_PREEMPT causes corruption of application's FPU stack[/url]. One paragraph from there:

          Quote:
          I tracked this down to a single kernel configuration option. If
          CONFIG_PREEMPT is set to 'y' the application will start crashing. If
          CONFIG_PREEMPT is replaced by CONFIG_PREEMPT_VOLUNTARY, the application
          will run without errors.


          There have been threads about CONFIG_PREEMPT on this forum as well.

          Gruß,
          Gundolf

          Computer sind nicht alles im Leben. (Kleiner Scherz)

          Ver Greeneyes
          Ver Greeneyes
          Joined: 26 Mar 09
          Posts: 140
          Credit: 9562235
          RAC: 0

          Could the application detect

          17 Apr 2010 15:44:09 UTC
          Message 96867 in response to message 96866
          (moderation:
            )

            Could the application detect the value of CONFIG_PREEMPT and return a useful error message if it's set to the wrong thing? That's assuming this will fix things for him.

            Jord
            Joined: 26 Jan 05
            Posts: 2952
            Credit: 5893653
            RAC: 6

            It's not a case of

            17 Apr 2010 16:21:10 UTC
            Message 96868 in response to message 96867
            (moderation:
              )

              It's not a case of application or BOINC in this case, so no. It's the Kernel that's doing this.

              Quote:

              The problem is with a Kernel is compiled with CONFIG_PREEMPT=Y while it should be =N

              The CONFIG_PREEMPT option preempts any running task in memory, by permitting a low priority process to be preempted involuntarily even if it is in kernel mode executing a system call and would otherwise not be about to reach a natural preemption point. This wrecks the FPU stack, which in return gives you a signal 8 error outcome.

              To check what the status of CONFIG_PREEMPT is in your Kernel, check the .config file in the /usr/src/linux directory, or similar directory, so do:
              grep PREEMPT /usr/src/linux/.config

              Or using /proc/config.gz do:
              cat /proc/config.gz | gunzip - | grep PREEMPT

              You'll get a list of PREEMPT options, the ones that your Kernel can do and which ones are set.
              You'll have to make sure that CONFIG_PREEMPT isn't set to Yes, but preferably that PREEMPT_VOLUNTARY is set.

              You can do this by recompiling your kernel. The how and what on that depends on your distro and your skill to roam around in Linux.

              There are also runtime /proc/sys knobs and boot-time flags to turn voluntary preemption (CONFIG_VOLUNTARY_PREEMPT) and kernel preemption (CONFIG_PREEMPT) on/off:

              # turn on/off voluntary preemption (if CONFIG_VOLUNTARY_PREEMPT)
              echo 1 > /proc/sys/kernel/voluntary_preemption
              echo 0 > /proc/sys/kernel/voluntary_preemption

              # turn on/off the preemptible kernel feature (if CONFIG_PREEMPT)
              /proc/sys/kernel/kernel_preemption
              /proc/sys/kernel/kernel_preemption

              The 'voluntary-preemption=0/1' and 'kernel-preemption=0/1' boot options can be used to control these flags at boot-time.

              Not all distros allow for the latter use of startup flags, though.


              Ver Greeneyes
              Ver Greeneyes
              Joined: 26 Mar 09
              Posts: 140
              Credit: 9562235
              RAC: 0

              Well, I know. So the

              17 Apr 2010 16:44:46 UTC
              Message 96869 in response to message 96868
              (moderation:
                )

                Well, I know. So the application doesn't have the necessary rights to query said .config file?

                ML1
                ML1
                Joined: 20 Feb 05
                Posts: 347
                Credit: 86563414
                RAC: 42

                That's quite an obscure

                20 Apr 2010 20:59:18 UTC
                Message 96870
                (moderation:
                  )

                  That's quite an obscure one!

                  In case of interest, for my Mandriva kernel here, I get:

                  $ cat /proc/config.gz | gunzip - | grep PREEMPT
# CONFIG_PREEMPT_RCU is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set

                  Hope that might help,

                  Happy crunchin',
                  Martin

                  See new freedom: Mageia Linux
                  Take a look for yourself: Linux Format
                  The Future is what We all make IT (GPLv3)

                  martin
                  martin
                  Joined: 3 Apr 10
                  Posts: 5
                  Credit: 4908716
                  RAC: 0

                  RE: RE: Recompilation of

                  22 Apr 2010 20:21:11 UTC
                  Message 96871 in response to message 96866
                  (moderation:
                    )

                    Quote:
                    Quote:
                    Recompilation of glibc solved problem with messages from grsec. But S5GCE tasks still fail.

                    Task h1_0444.15_S5R4__207_S5GCEa_1_0 ended with
                    ERROR: Stepped outside the coarse grid! 
2010-04-17 15:20:52.3172 (912) [CRITICAL]: ERROR: MAIN() returned with error '13'
                    but many of the other tasks got
                    APP DEBUG: Application caught signal 8.

                    FPU status word ffff80c1, flags: ERR_SUMM STACK_FAULT INVALID

                    which points to problems with kernel configuration option CONFIG_PREEMPT.

                    I did a google search for "Application caught signal 8" and found [url=http://old.nabble.com/CONFIG_PREEMPT-causes-corruption-of-application's-FPU-stack-td17293854.htm]CONFIG_PREEMPT causes corruption of application's FPU stack[/url]. One paragraph from there:

                    Quote:
                    I tracked this down to a single kernel configuration option. If
                    CONFIG_PREEMPT is set to 'y' the application will start crashing. If
                    CONFIG_PREEMPT is replaced by CONFIG_PREEMPT_VOLUNTARY, the application
                    will run without errors.

                    There have been threads about CONFIG_PREEMPT on this forum as well.

                    Gruß,
                    Gundolf

                    Thanks for help. Changing of CONFIG_PREEMPT helped. I found there
                    CONFIG_PREEMPT causes corruption of application's FPU stack, that this bug has been fixed 10 monts ago. Probably the old bug is there again.

                    Martin

                    DanNeely
                    DanNeely
                    Joined: 4 Sep 05
                    Posts: 1364
                    Credit: 3562358667
                    RAC: 0

                    RE: Thanks for help.

                    22 Apr 2010 22:01:41 UTC
                    Message 96872 in response to message 96871
                    (moderation:
                      )

                      Quote:


                      Thanks for help. Changing of CONFIG_PREEMPT helped. I found there
                      CONFIG_PREEMPT causes corruption of application's FPU stack, that this bug has been fixed 10 monts ago. Probably the old bug is there again.

                      Martin

                      Is this the same bug that was first found when it was discovered to be behind Einstein crashes?

                      Comment viewing options

                      Select your preferred way to display the comments and click "Save settings" to activate your changes.

                      Forums › Cruncher's Corner