2006-06-18 12:26:32 [XtremLab] Reason: Requested by user
2006-06-18 12:26:32 [XtremLab] Reporting 1 tasks
2006-06-18 12:26:43 [XtremLab] Scheduler request succeeded
2006-06-18 12:29:08 [Einstein@Home] Sending scheduler request to http://einstein.phys.uwm.edu/Einste
inAtHome_cgi/cgi
2006-06-18 12:29:08 [Einstein@Home] Reason: Requested by user
2006-06-18 12:29:08 [Einstein@Home] Requesting 33650 seconds of new work
2006-06-18 12:29:18 [Einstein@Home] Scheduler request succeeded
2006-06-18 12:29:18 [Einstein@Home] Message from server: No work sent
2006-06-18 12:29:18 [Einstein@Home] Message from server: (there was work but you don't have enough d
isk space allocated)
2006-06-18 12:29:18 [Einstein@Home] Message from server: Not enough disk space (only 60.4 MB free fo
r BOINC). Review preferences for minimum disk free space allowed.
My preferences are to use 100% of disk space,
and left 0 mb free !
Copyright © 2024 Einstein@Home. All rights reserved.
Whats the clue ?
)
I'm not sure. You might want to try running scandisk. I'm not sure about other file systems, but fat32 can display an incorrect space left number if it's corrupted.
Since the new S5 work is so
)
Since the new S5 work is so large, having a long cache is a bad idea during the transition.
I'd suggest checking your connect to network settings and drop it below 1.0
RE: My preferences are to
)
And the third?
Use no more than: ... disk space
Leave at least: ... disk space free
Use no more than: ... % of total disk space
Michael
Team Linux Users Everywhere
RE: RE: My preferences
)
Use no more than: 2 GB disk space -> my disk has 850 mb total
Leave at least: 0.00 GB disk space free
Use no more than: 100% of total disk space
btw: connect to network every 0.00001 days
and the disk is NTFS -> had run scandisk and defrag today !
Stumbled !!!
Click signature for global team stats
Leaving 0 MB is not a wise
)
Leaving 0 MB is not a wise value, I think. Also 0.00001 days may not be good, perhaps values in preferences doesn't allow such precission.
Anyway, you seems to hit the limit.
I would free up some space or put BOINC on different partition.
100 MB might just not be enough for whole BOINC, Einstein and who-knows-what-else.
I'd suggest increasing your
)
I'd suggest increasing your connect to network to 0.05 (72 minutes)
I've tried a few settings lower than that, and it causes odd things to happen.
If the request for 33650 seconds was the problem, changing the connect setting may solve it. If you machine stops asking for too much work then that was likely it.
RE: Leaving 0 MB is not a
)
Thanks,
problem solved via FDISK to define a bigger partition,
on another HD -> the old one, really had only 850 MB total.
Now, I am downloading h1_0996.0_S5R1
Boincview -> is estimating 6 hours left to complete the download,
this, after 2 hours of download time.
This way,
I will be allowed to crunch at maximum 3 WUs each day,
cause the day has only 24 Hours
btw: my modem is reporting 30% of data compression, done by modem hardware.
Could'nt the WUs, be gzip(ed), or better rar(ed),
before sending it over a 28800 bps modem ?
Click signature for global team stats
You can get upto 8 WUs
)
You can get upto 8 WUs assigned per file downloaded, so baring bad luck you should be able to keep going at 100% if you can provide a dedicated connection. If you don't have a dedicated data line, you could game the system by spiking your time between connection and dropping it back down. I'm not sure if doing it before or after downloading the datafile would be hte optimum time though?
Any data compression in the WUs themselves would make more sense at the boinc level rather than as an adon for the science app. I'm not sure where to post a suggestion for that, but the suggestions board here would probably be a good start (if nothing else somoene there could probably give you a pointer to the correct location.
RE: 2006-06-18 12:29:18
)
Must be the season for this error!
I saw much the same with mine ( at about 90MB ) last week, and discovered my son had installed a couple of games while I was out ( school holidays at present ). So my hard drive free space had shrunk from many GB's down to not a lot! Those first-person-shooters do suck the marrow out of the hard-drives... :-)
Cheers, Mike.
I have made this letter longer than usual because I lack the time to make it shorter ...
... and my other CPU is a Ryzen 5950X :-) Blaise Pascal
RE: RE: 2006-06-18
)
You may be right with Season of this Error.
I get it too.
http://einsteinathome.org/task/33851668
Pentium 4 2.8 Ghz, 30.4 GB free HD-Space, Windows Vista Beta2 (actual patches installed)
Albert S41.08 / BoincStudio
running 100% E@H
The follwing WU all correct.
Chris
*Die Signatur befindet sich aus technischen Gründen auf der Rückseite dieses Beitrages!*