Canceled "bad" BRP beams

Bernd Machenschalk
Bernd Machenschalk
Moderator
Administrator
Joined: 15 Oct 04
Posts: 4265
Credit: 244921018
RAC: 16974
Topic 198089

Occasionally we get data from Radio telescopes (usually Arecibo) that doesn't give any usable results when analyzed with our application. We have a few checks implemented in data pre-processing in order to not pass such data to the E@H clients at all, but occasionally a few slip through. All tasks from such a beam would end up as "validate error"s (not as "invalid"!). We do have methods to monitor such validate errors that accumulate on the WUs of single beams. In order to avoid wasting computing power on these, we need to cancel such workunits. Unfortunately this means that you won't get any credit for these tasks.

I set up this thread to notify you of such canceled beams.

BOINC does have a feature to notify clients of canceled workunits on scheduler contacts. However this feature is implemented in a way that, when enabled on E@H, grinds our database to a halt. So we decided not to enable it here.

BM

BM

Bernd Machenschalk
Bernd Machenschalk
Moderator
Administrator
Joined: 15 Oct 04
Posts: 4265
Credit: 244921018
RAC: 16974

Canceled "bad" BRP beams

I just canceled workunits of the following beams:

p2030.20150119.G66.66-00.73.N.b4s0g0.00000
p2030.20150119.G66.66-00.73.N.b5s0g0.00000
p2030.20150119.G66.66-00.73.N.b6s0g0.00000

BM

BM

Mumak
Joined: 26 Feb 13
Posts: 325
Credit: 3291717868
RAC: 1537455

p2030.20150119.G66.66-00.73.N

p2030.20150119.G66.66-00.73.N.b3s0g0 doesn't seem to be a good one either:
http://einsteinathome.org/workunit/218422058
http://einsteinathome.org/workunit/218422081

-----

Bernd Machenschalk
Bernd Machenschalk
Moderator
Administrator
Joined: 15 Oct 04
Posts: 4265
Credit: 244921018
RAC: 16974

Yep. Been watching it for a

Yep. Been watching it for a while. Canceled

p2030.20150119.G66.66-00.73.N.b4s0g0.00000

as well.

BM

BM

Richard Haselgrove
Richard Haselgrove
Joined: 10 Dec 05
Posts: 2139
Credit: 2752618092
RAC: 1497334

SETI receives data from the

SETI receives data from the same set of Arecibo antennae (7 channels, 2 polarities), and records them to its own recorder. Somewhere in the feed, we sometimes see a channel - B3_P1, in SETI terminology - which gets a bit stuck somewhere in the pipeline, and ruins that channel for sometimes weeks at a time (it seems to be seasonal). I have no way of knowing whether the fault is before or after the SETI feed is branched off the main PALFA source.

ExtraTerrestrial Apes
ExtraTerrestria...
Joined: 10 Nov 04
Posts: 770
Credit: 536500999
RAC: 189238

It could be a good idea to

It could be a good idea to communicate with others which beams are bad. If not already done.. and if the definition of "bad" is similar enough across users.

MrS

Scanning for our furry friends since Jan 2002

Bernd Machenschalk
Bernd Machenschalk
Moderator
Administrator
Joined: 15 Oct 04
Posts: 4265
Credit: 244921018
RAC: 16974

We had to cancel WUs of

We had to cancel WUs of beam

p2030.20141111.G191.02-00.48.N.b4s0g0.00000

(after half a year of flawless operation).

The E@H pipeline is similar to the other pipelines of the PALFA collaboration. Aside from the actual E@H application we use the very same software ("PRESTO") that PALFA is using and which is specifically written and tuned for pulsar timing. I strongly doubt that this can be used for signals of any other type and thus that it has any similarity with what SETI does.

BM

BM

MAGIC Quantum Mechanic
MAGIC Quantum M...
Joined: 18 Jan 05
Posts: 1695
Credit: 1042031050
RAC: 1404937

http://einstein.phys.uwm.edu/

http://einsteinathome.org/account/tasks&offset=0&show_names=1&state=4&appid=0

I only got a handful and considering the 450+ valids I got that is not all that far from a flawless operation.

Thanks for the info Bernd

Stranger7777
Stranger7777
Joined: 17 Mar 05
Posts: 436
Credit: 417489705
RAC: 33687

O, I though that "PRESTO" is

O, I though that "PRESTO" is an old but good for those times engine of Opera browser until version 12.17 after which it became an another sloooow clone of Google Chrome.

Bernd Machenschalk
Bernd Machenschalk
Moderator
Administrator
Joined: 15 Oct 04
Posts: 4265
Credit: 244921018
RAC: 16974

We canceled the following

We canceled the following workunits of beam "p2030.20141111.G191.02-00.48.N.b3s0g0.00000":

p2030.20141111.G191.02-00.48.N.b3s0g0.00000_3665
p2030.20141111.G191.02-00.48.N.b3s0g0.00000_3691
p2030.20141111.G191.02-00.48.N.b3s0g0.00000_3695
p2030.20141111.G191.02-00.48.N.b3s0g0.00000_3699
p2030.20141111.G191.02-00.48.N.b3s0g0.00000_3772
p2030.20141111.G191.02-00.48.N.b3s0g0.00000_3790

It currently looks like that only these few workunits with rather high "job numbers" (>3600) are affected, so we didn't cancel the whole beam (yet).

BM

BM

Christian Beer
Christian Beer
Joined: 9 Feb 05
Posts: 595
Credit: 118566204
RAC: 114688

We canceled the workunits for

We canceled the workunits for the following beams that accumulated a lot of validation errors:

p2030.20151021.G196.96+00.49.S.b6s0g0.00000
p2030.20151024.G197.22+00.50.N.b3s0g0.00000
p2030.20151029.G180.60-00.37.N.b4s0g0.00000
p2030.20151029.G180.60-00.37.N.b5s0g0.00000
p2030.20151102.G197.50+00.07.N.b0s0g0.00000
p2030.20151102.G197.50+00.07.N.b5s0g0.00000
p2030.20151102.G197.50+00.07.N.b6s0g0.00000

This seems to be a lot but we didn't do this kind of cleaning in a long time. I recently updated our internal overview page for this, so it is now easier to cancel those "bad" beams and associated workunits.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.