Android app release: feedback thread

jjwhalen
jjwhalen
Joined: 21 Jun 06
Posts: 7
Credit: 645238
RAC: 0

I activated Android/ARM 7.2.7

I activated Android/ARM 7.2.7 on my Galaxy S III ComputerID 8240990 a couple days ago. I was running single core only, with default settings. 3 of 3 BRPS Arecibo tasks completed but failed to vailidate. Both WCG (FAAH Vina) & Yoyo (HAT) tasks have validated successfully without issue.

I've suspended E@H on this phone pending a resolution.

Best wishes :)

John Milonas
John Milonas
Joined: 24 Jul 13
Posts: 1
Credit: 8177
RAC: 0

I installed it on my Xperia

I installed it on my Xperia Tipo,after a day it begun a project,however the whole phone operation is a bit slower,I guess single core phones is not the ideal hardware to run boinc,I will keep it working though,I do operate it in battery,since I do charge my phone everyday

Laurie Kennedy
Laurie Kennedy
Joined: 26 Sep 10
Posts: 2
Credit: 168026681
RAC: 89609

Works just fine on my Samsung

Works just fine on my Samsung Galaxy S3, though I did need to tweak memory settings to get 4 cores running. First units through and validated.
There has been some variation in the number of cores reported as 'available' and being used from time to time. Not battery as it's been on charge throughout, and temperature reported by 'GUI Messages' hasn't been above 30C

Cheers, Laurie

Colin Porter
Colin Porter
Joined: 15 Feb 05
Posts: 21
Credit: 6479335
RAC: 0

RE: RE: LOL Mike, does it

Quote:
Quote:
LOL Mike, does it actually work though?

Well I haven't bought the gadget yet ... so I don't know. Hope Springs Eternal ! :-)

Answer = Fraid it dosen't work on my Samsung Galaxy Ace.

I have given up and uninstalled it after 4 days. Suspect this phone being a very low spec item is just not up to it memory wise. The best I got was to 18% then when I took a call Boinc reverted to 17.3% complete and got stuck in a loop of split ID. Nothing I tried could save the WU (reboots/memory clean out/ cache clean out of other apps etc).

I will keep an eye on progress and if Boinc ever manage to get the app to install on an SD card instead of the internal memory I will give it another go.

Still a brilliant idea even if it must be a programming nightmare.

Warning! This post contains atrocious spelling, and terrible grammar. Approach with extreme edginess.

It's not the speed, but the quality - Until I get a faster computer

Colin Porter
Colin Porter
Joined: 15 Feb 05
Posts: 21
Credit: 6479335
RAC: 0

RE: Hi everyone I install

Quote:
Hi everyone I install on a Galaxy S (ok its getting on a bit now) its been saying nothing to do since installed,

Just try reducing the amount of memory that BOINC should leave free. Default is 0.1M so try 0.05 and I suspect it will download a WU.

Warning! This post contains atrocious spelling, and terrible grammar. Approach with extreme edginess.

It's not the speed, but the quality - Until I get a faster computer

ExGP
ExGP
Joined: 26 Jul 13
Posts: 2
Credit: 4339
RAC: 0

Runs on a Nexus 10, but warms

Runs on a Nexus 10, but warms up when I use the tablet for anything else. There is no CPU thermometer, only battery (which is not too hot). Ok when screen off, but... when too hot to handle I unplug the charger and it stops Boinc running and it cools.
I may try it with only one CPU instead of 2.

Tim

Alex
Alex
Joined: 1 Mar 05
Posts: 451
Credit: 500101245
RAC: 215801

Some days ago I posted

Some days ago I posted problems when running all cores with a mix of Einstein and Pogs; many Pogs wu's errored out.
I Tried another mix now, Einstein and Milkyway. Now both projects have a high error rate, the device here at Einstein is
http://einsteinathome.org/host/8007044/tasks
4 ouf 6 wu's faild, three of them with SIGSEGV: segmentation violation

I'm trying now another mix, MW and Pogs, let's see how this works.

Since this happens only @ native Boinc this might be a problem of this client. I also posted this to Mateusz Szpakowski but did not get an answer until now.

Alexander

ExGP
ExGP
Joined: 26 Jul 13
Posts: 2
Credit: 4339
RAC: 0

Having similar settings

Having similar settings option as for Windows would help, then could just set it to run at certain times, or suspend when anything else runs. Ideal would be to suspend when screen is on.

Tim

Suffkoppus
Suffkoppus
Joined: 28 Oct 07
Posts: 47
Credit: 649648843
RAC: 0

First 1000 credit done

First 1000 credit done without any problems except from battery drain. Even with Sony Charger 1,5A I can only use 80% of CPU Time with 4 cores.

http://einsteinathome.org/host/8218580/tasks

Rob
Rob
Joined: 17 Apr 12
Posts: 8
Credit: 1781499
RAC: 0

Ok, I'm experiencing some

Ok, I'm experiencing some weird behavior.
I crunched one WU and reported it. A few days ago I told the project to accept new tasks. Thing is, I don't get anything.
I have one BRP (arecibo) WU "download complete 0,0%" but nothing happens after that. Elapsed time 00:00:00.
My Nexus 4 is connected to its charger. The project isn't set to suspended.
The status page says "Suspended - No recent tasks available". I'm also connected to WiFi and there is no download limit. There is enough free space.
The device isn't hot. CPU crunching is activated in my Einstein preferences.

Anyone having an idea? I'm using Android 4.3 (stock).

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.