How can they "aim" a LIGO?

nooneishere
nooneishere
Joined: 19 Feb 05
Posts: 11
Credit: 138760
RAC: 0
Topic 188466

I watching the sphere of the screen saver and it occured to me. How can they know what area of the sky is sending a gravitational wave if one hits? I assume it would have to come from some area of space within the visible horizon. But beyond that LIGO measures contractions of space in the tubes or lack thereof. How can they possibly tell that one reading was caused by an object at 45 degrees (useing the earth's core as the Y axis)to true north instead of an section of the sky at 33 degrees to the South Southwest?

I mean how do they know what part of the sky your currently analyzing? I realize the screen saver is more eye candy that anything else. But can they really determine that the data I'm crunching came from such an exact part of the sky?

Mythos
Mythos
Joined: 8 Mar 05
Posts: 9
Credit: 165383
RAC: 0

How can they "aim" a LIGO?

"To determine (by triangulation) the exact celestial location of many gravitational-wave sources, and to extract all the other information the waves carry, more than the two sites will be required. For these studies LIGO is part of an international network of observatories, established in a collaborative arrangement with scientists in other countries. LIGO is a crucial component of this network. Scientists in France and Italy are establishing a three-kilometer observatory near Pisa, Italy. Other efforts are underway in Britain, Germany, Japan and Australia."

Quoted from the LIGO Fact Sheet, which can be found below:
LIGO

S@NL - Marleen
S@NL - Marleen
Joined: 18 Jan 05
Posts: 25
Credit: 4004696
RAC: 617

> I mean how do they know

> I mean how do they know what part of the sky your currently analyzing? I
> realize the screen saver is more eye candy that anything else. But can they
> really determine that the data I'm crunching came from such an exact part of
> the sky?

Analyzing a specific part of the sky is in this post, an explanation by Ben Owen, specifically this part:
This is a systematic search of the sky, one location at a time, for any periodic gravitational wave coming from that location. It has to be done for each location because the frequency shifts (Doppler shifts) due to the Earth's motion are different for different sky locations.
I think the "crosshairs" in the screensaver shows this spot (it is moving all over the sphere).

So they take a bunch of LIGO readings, pick a spot on the sphere, apply corrections for the Doppler effect for that spot en start analyzing the corrected data for periodic waves. If something is found for a specific spot, I guess the source is somewhere in that "area", but I don't know how large that area is.

barkster
barkster
Joined: 3 Apr 05
Posts: 71
Credit: 447475
RAC: 0

I've read thru both the

I've read thru both the explanations, and even as a layman, I'm still not convinced those are sound answers. They appear even to be conflicting.

A couple of things that don't seem to make sense when combined together:

1. To say you're searching a particular point in the sky implies that you can actively "point" something at it (like a parabolic dish, or a mirror), or "block out" the areas of non-interest. I'm sure that some physical mechanism of LIGO combined with a lot of computational power was made to determine from which direction a gravity came, but the question remains "How does one point (or aim) a LIGO" and conduct a scanning type of "all-sky" search?

2. The term "triangulation" implies a passive determination of a bearing (azimuth and elevation, or in this case I assume a right ascension and declination). The fact that you need more than 2 (3 really) sites to each determine a bearing to complete a "triangulation" of a pulsar seems to imply that the LIGOs can't point, but act more like omni-directional sensors.

Additionally... How is LIGO aiming at the southern celestial hemisphere? Do gravity waves even behave with a "field of view" like optics or radio waves to make "pointing" possible? How does one "block out" gravity waves from outside the "field of view"?

"No, I'm not a scientist... but I did stay at a Holiday Inn Express."

gravywavy
gravywavy
Joined: 22 Jan 05
Posts: 392
Credit: 68962
RAC: 0

> I've read thru both the

Message 8139 in response to message 8138

> I've read thru both the explanations, and even as a layman, I'm still not
> convinced those are sound answers. They appear even to be conflicting.
>
> A couple of things that don't seem to make sense when combined together:
>
> To say you're searching a particular point in the sky implies that you can
> actively "point" something at it (like a parabolic dish, or a mirror)

Let me explain how I understand this. Maybe one of the project team could put me right if I am off track. In contrast to SETI (where they do aim the receiver), I do not think there is the same issue of 'aiming' the hardware.

If you had a camera that takes holograms, you could take a picture of the sky and later on look at different pieces of sky as thay appeared from your camera at the time. Every part of a hologram contributes to every direction you look, and converesely to get the best view in that direction you need every part of the hologram.

You take the picture then, and only decide where to 'point' it now. Tomorrow, with the same picture you decide to look in another direction and you can see that as well.

In fact, what your eyes are doing is processing some of the light that passes through the hologram, and throwing away other parts of that light. The stuff your eyes keep is 'added up' by the lens in your eye, and some rays of light add together to make bright spots and others cancel out to make dark spots. Point your eye in a different direction 'through' the hologram and you see something else.

That is quite a fair analogy to what we are doing here. The LIGO numbers together are a very poor quality hologram (I mean the data is sparse compared to the amount of data represented by a hologram on ordinary photgraphic film, I don't mean to cast apsersions of the quality of the LIGO which is the best LIGO we've got so far)

When lots of WU have the same data file, they all have the same 'hologram' taken at the same time. Each different WU is applying the same maths but with different values of a few parameters, and this is 'aiming' where your client is looking.

That maths that is used to do this is based on Fourier analysis, and without having looked at any of the code I'd bet that our clients are stuffed full of Fast Fourier Transforms. It is the FFT that is 'aimed', not the hardware.

The reason that the eye analogy is such a good one is that the FFT can also be used in the design and analysis of lens systems. You could say that the lens in your eye, or in your camera, performs an Analogue Fourier Transform.

> Additionally... How is LIGO aiming at the southern celestial hemisphere? Do
> gravity waves even behave with a "field of view" like optics or radio waves to
> make "pointing" possible? How does one "block out" gravity waves from outside
> the "field of view"?

The LIGO is like a tiny cross shaped window, and each dataset can 'see' everything you could see looking through a cross shaped (or diamond shaped??) window at that point. It is how you process the data afterwards that makes the difference. Just like when you look through a fence you can choose to focus on the fence (and the background is a blur) or can choose to focus on the hills behind (and the fence goes blurry), you could do the same with a hologram of the fence and the background seen thropugh it, and to use the same analogy we do the same by tweaking the paramters for the FFT. It is not so much that you block one thing as you focus on another, and let the unwanted stuff blur out.

Just like with a camera, where the wider the aperture the smaller the depth of field, so too with a LIGO, the larger the physical device the more precisely the FFTs can home in on one particular feature and ignore the rest.

~~gravywavy

barkster
barkster
Joined: 3 Apr 05
Posts: 71
Credit: 447475
RAC: 0

Mucho thanks for the reply,

Mucho thanks for the reply, Gravy...

My background is mostly in RF, signal processing (I remember manually crunching FFTs in college till I puked), and antennas so my mind is trying to decipher these explanations in that frameset.. or dare I say it.... that PARADIGM (e.g. antenna "gain", directionality, etc). The analogy I had in my head was that of locating a distant RF beacon with an array of recievers (the "2 or more" LIGOs) by standard radio direction finding algorithms (time, phase, or frequency difference of arrival).

I understand that we may be "aiming" at a point in the sky by virtue of the fact that we are simply processing a subset of data from that particular region... but the LIGOs themselves are seeing things and collecting data in 360 degree (phi/theta) over time (your hologram analogy) with earth in the center, correct? Or, if the "window" you describe is actually a field of view (like a classic telescope), and the LIGOs are actually looking at a specific volume of space at some RA/Dec and range from earth, then how is the window scanned and range gated to look at a specific volume of space? Electronically? Mechanically? Mathematically? Magically? And how are the LIGO detections of gravity waves made "within" that distant volume? Or is the optical telescope anology more correct, where the area of space in question is "observed" by the LIGOs to the exclusion of everything else that it sees within it's field of view?

And it just occured to me... the object is to detect gravity waves.... so why are we not aiming at the known pulsars and supernovae? Why the all-sky search? I thought I saw the answer to that one on another web page, but I can't find it, now.

Honestly, not to dispute you or make lite of any of the previous explanations.... just that the engineering behind this "aiming" thing (of what seems to me is essentially just a very large laser motion detector) is really getting the best of my curiosity. My brain is a sponge in search of water.

Thanks again!
Glenn (a.k.a. "Barkster", a.k.a. "Droopy")

"No, I'm not a scientist... but I did stay at a Holiday Inn Express."

Bernd Machenschalk
Bernd Machenschalk
Moderator
Administrator
Joined: 15 Oct 04
Posts: 4267
Credit: 244932081
RAC: 16370

Sorry, haven't much time, but

Sorry, haven't much time, but to give you a rough idea:

The method we are using is called "matched filering". In principle we generate a signal with the expected properties and search for it in the data. The gravity waves sent out by the pulsars should be pure sinosoids of a given frequency. Arriving at the detectors, however, they got modulated in amplitude as the sensitivity of the detectors varies with their orientation relative to the source, and in frequency because of doppler effects caused by the motion of the earth (again relative to the source). These two modulations have to be taken into account, on one hand making the calculations much more complicated, but on the other allowing us to look in a certain direction of the sky. Gravity waves are not affected by matter, so it doesn't matter from which side of the earth they arrive.

BM

BM

gravywavy
gravywavy
Joined: 22 Jan 05
Posts: 392
Credit: 68962
RAC: 0

Thanks BM, - I was thinking

Message 8142 in response to message 8139

Thanks BM, - I was thinking it worked a bit like a phased array, whereas in fact you don't have an *array* of detectors so that is the wrong analogy.

If I undertand your answer correctly, we know the direction in the plane of the equator because the 'red' shift is max when the Earth's rotation takes it directly away from the source, and the 'blue' shift is max when we go towards the source.

To get the third coordinate ( // Earth's axis ) you use the way the measured signal strength varies in time as the constant incoming signal is aligned more strongly and more weakly with the favoured direction of your 'antenna'.

~~

~~gravywavy

barkster
barkster
Joined: 3 Apr 05
Posts: 71
Credit: 447475
RAC: 0

Thanks, BM! Let's see if

Message 8143 in response to message 8141

Thanks, BM!

Let's see if I'm getting this, now.

> The method we are using is called "matched filering". In principle we
> generate a signal with the expected properties and search for it in the data.

So the LIGOs are essentially "omni-directional" and we're searching the LIGO's collected data for matches with data from a self-generated sample signal of gravity waves that we might expect to see from a given particular point in space. (Yikes! Talk about brute force calculation!) And I assume now this is mainly to prove that our sample signals are built correctly and validate LIGO (prove our theories) and therefore claim to be able to "detect" gravity waves?

> The gravity waves sent out by the pulsars should be pure sinosoids of a given
> frequency.

Hence the clear value of the FFT in visualizing the detection...

> Arriving at the detectors, however, they got modulated in amplitude as the
> sensitivity of the detectors varies with their orientation relative to the
> source,

"Losses" due to "antenna/signal polarization"? (Interesting! Is that indeed a feature of gravity waves?) Does that help locate the pulsar? and/or perhaps give you spin axis of the pulsar?

> and in frequency because of doppler effects caused by the motion of the
> earth (again relative to the source).

Doppler, as indicated... Used in similar fashion as the Frequency Difference of Arrival (FDOA) techniques for radio direction finding?... or (as Gravy points out) maybe more simply by determing at what point in the earth's rotation the doppler shift changes in acceleration as the LIGO passes "underneath" the pulsar? That would at least give you a rough estimate of right ascension, no?

> These two modulations have to be taken into account, on one hand making the
> calculations much more complicated, but on the other allowing us to look in
> a certain direction of the sky.

"... allowing us to look in a certain direction of the sky."... in a manner of speaking, as predetermined by the self-generated signal, correct?

> Gravity waves are not affected by matter, so it doesn't matter from which
> side of the earth they arrive.

That part I had assumed to be true, but wanted to confirm.

SO.... getting back to original post... the cross hair on the screen saver really is just eye candy :-) ... or at most just a representation of the "scanning" method.

Sorry for the continuing list of questions... but this is all very interesting to learn about. I appreciate the replies.

Thanks again!
Glenn

"No, I'm not a scientist... but I did stay at a Holiday Inn Express."

Bernd Machenschalk
Bernd Machenschalk
Moderator
Administrator
Joined: 15 Oct 04
Posts: 4267
Credit: 244932081
RAC: 16370

I see you're getting the

I see you're getting the idea. Thwo things to add:

- The strength of the gravity wave remains (more or less) the same, however it depends on the angle in which it hits the detector how strong the detected signal is. The detector actually measueres the difference of the lengths of its arms, so the signal is seen strongest when the wave comes in from the direction one arm points in and weakest (ideally zero) when it comes in right in the middle between them, deforming both arms the same way.

- Movement of the earth relative to the source doesn't only mean its own rotation, but it also movement around the sun in the solar system, and this solar system also moves relative to the center of our galaxy. These movements, btw., are described in the "earth" and "sun" files you downloaded.

BM

BM

Ben Owen
Ben Owen
Joined: 21 Dec 04
Posts: 117
Credit: 65696753
RAC: 3029

Hi folks, I'm back after

Hi folks,

I'm back after being tied up for a while. The forum just disconnected and ate a very long post I tried, so I'll just say quickly:

LIGO isn't physically aimed at all. The sites move only as the Earth moves. The orange marker on the screensaver is not eye candy; it's very real and determines the cost of the search in CPU cycles. But the aiming is done in software rather than hardware. LIGO picks up waves from (almost) the whole sky all the time. They go right through the Earth, so there's no worry about what hemisphere a detector is in. Triangulation is used for short-lived sources, but that doesn't give you the kind of position accuracy you see in the screensaver. Matched filtering is a math trick that lets you latch onto one signal out of all the signals (and noise) that may be present simultaneously in the data.

For long-lived periodic sources, which are the only ones Einstein@Home is looking for, triangulation isn't used. The directionality comes from the Doppler shifts a signal picks up as the detectors move around. The Doppler shifts depend on time and sky position. If you process the data for one sky position (which you do with Einstein@Home) it enhances anything that might be coming from that position and washes out anything coming from other sky positions. Einstein@Home picks the next sky position close enough that the "washing out" due to a signal possibly appearing between the processed sky positions is never worse than, say, five percent. (I forget exactly what the number is for this search.)

The smallness of the window someone was referring to earlier comes from the length of the data set analyzed. In the future the data sets are going to get longer and longer (don't worry, the individual WUs will stay manageable!), which means the gap between different sky positions (different locations for the orange marker) will get narrower and narrower.

A lot of the math tricks were originally developed for radio, but LIGO is taking them much further. A lot of the things (like aiming) that radio could mostly do in hardware and merely "top up" in software have to be done all or almost all in software for gravitational wave detectors. There are some tantalizing similarities to radio, but it's really a different game.

Hope this helps,
Ben

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.