No work sent - Not Enough Disk Space???

Gweedz
Gweedz
Joined: 16 Nov 05
Posts: 45
Credit: 3639896
RAC: 0

For both sites it says "no"

For both sites it says "no" and "(no restriction)". I believe these are the default as I don't recall changing them.

I don't know how to check where my general prefs point to.

Gweedz
Gweedz
Joined: 16 Nov 05
Posts: 45
Credit: 3639896
RAC: 0

RE: If you haven't been

Message 19683 in response to message 19680

Quote:
If you haven't been keeping up with the thread I pointed you to earlier, you might want to catch up on it now.


Yup, I'm following it. I just thought I'd reply to whatever questions anyone has to help out in the meantime.
I know the basics about computers, but I'm still trying to learn my way around BOINC.

Jord
Joined: 26 Jan 05
Posts: 2952
Credit: 5893653
RAC: 16

RE: I don't know how to

Message 19684 in response to message 19682

Quote:
I don't know how to check where my general prefs point to.


Just open up Boinc Manager, go to the Message tab and scroll all the way up. Just after you started Boinc, it started registering messages.

For me, after the different projects being shown attached, the next line shows what my general prefs are set by. It's been doing so since 4.45, so you system should do the same. :)

Stick
Stick
Joined: 24 Feb 05
Posts: 790
Credit: 33144875
RAC: 979

RE: I don't know how to

Message 19685 in response to message 19682

Quote:
I don't know how to check where my general prefs point to.

I think Ageless is asking which project your prefs load from. Should be one of the first messages under your Messages tab after start-up. Looks like the example he gave at the bottom of his post.

Edit: I guess I was a little late getting in here.

Gweedz
Gweedz
Joined: 16 Nov 05
Posts: 45
Credit: 3639896
RAC: 0

OK got it (wasn't sure where

OK got it (wasn't sure where to look).

General prefs: From Einstein@home (last modified 2005-11-21 17:44:50)

then the line below says:

General prefs: using your defaults.

Now I have a question... how do you copy-paste from the message window? Right-click on the mouse and CTRL-C don't work.

Stick
Stick
Joined: 24 Feb 05
Posts: 790
Credit: 33144875
RAC: 979

RE: OK got it (wasn't sure

Message 19687 in response to message 19686

Quote:

OK got it (wasn't sure where to look).

General prefs: From Einstein@home (last modified 2005-11-21 17:44:50)

then the line below says:

General prefs: using your defaults.

Now I have a question... how do you copy-paste from the message window? Right-click on the mouse and CTRL-C don't work.

Just hightlight the messages you want to copy and use the Boinc Manager buttons on the left side.

Jord
Joined: 26 Jan 05
Posts: 2952
Credit: 5893653
RAC: 16

RE: General prefs: From

Message 19688 in response to message 19686

Quote:
General prefs: From Einstein@home (last modified 2005-11-21 17:44:50)
General prefs: using your defaults.


Okay... I fold (my arms) for now. If the prefs are saying you are to run 24/7 and you yourelf never went through Boinc Manager, Projects tab, Press Einstein project, Press Suspend button on the left... then I have to blame your cat. ;)

But humor me. Open Boinc Manager, go to the Projects tab, press the Einstein project, is there a Resume button on the left in BM?
Open the Work tab of BM, select any of the units on "Activities suspended", do you see any button on the left saying "Resume" ??

Look, if you see any button saying Resume... it's your own fault. You must have set it. Or your cat. Or your polter geist. Or your antagonistic (girl)(boy)friend.

No program will jump onto Suspended mode with its buttons showing so, without your knowledge!

Gary Roberts
Gary Roberts
Moderator
Joined: 9 Feb 05
Posts: 5874
Credit: 117992548123
RAC: 21090865

Hey Jord, It really is

Hey Jord,

It really is good to see you in here and you don't have to blame his cat at all!!

You actually asked the correct key questions and I think everyone has missed the critical answer.

You asked:-

Quote:
What does it say on both sites for:
Do work while computer is in use? ??
Do work only between the hours of ??

and Guido answered:-

Quote:
For both sites it says "no" and "(no restriction)". I believe these are the default as I don't recall changing them.

So, when he gets up in the morning and starts to use his computer to see what's been happening overnight, isn't his "use" of the computer going to suspend whatever was running and unless he waits the full 3 minutes before he hits the next key the science app is going to remain suspended, isn't it??

Guido,

Here is some advice for you. The science app gets out of the way whenever you start to use your computer so many people find they really don't notice it if the preference for "Do work while the computer is in use" is set to "Yes". Try it out and see for yourself.

If you would like to see a bit more work than just two for EAH and two for rosetta, just increase your "Connect to network every X days" from the default 0.1 to say 0.5 but please don't go beserk until you see what it does. Whenever you change a preference, "Update" it on the website and then "Update" that project by selecting it in BOINC Manager and then hitting the "Update" button that will now not be "greyed out". The preference will be transferred automatically to other projects' websites during normal client/server contacts. You don't have to go and physically update each website, unless you are in some sort of desperate hurry :).

Cheers,
Gary.

Gary Roberts
Gary Roberts
Moderator
Joined: 9 Feb 05
Posts: 5874
Credit: 117992548123
RAC: 21090865

RE: OK I increased it to

Message 19690 in response to message 19677

Quote:
OK I increased it to 95% just to see what happens (but it did start working when left at 50%).

I've added emphasis to a part that is very interesting. You have stated elsewhere that your G:\\ partition is sized at 25.1GB with 6.79GB free and you were using a setting of "Use no more than 50% of total disk space". If this setting does refer to a fraction of "total disk space", there are two possible ways to interpret this. It could mean "Don't allow BOINC to use more than 12.5GB" or it could mean "Leave 12.5GB free". It can't be the former otherwise BOINC would never have given an error message about disk space at all. It can't be the latter else BOINC would never have run at all.

What about if it really meant "Don't allow BOINC to use more than 50% of the total free space (ie 3.4GB of the 6.8GB free). Well BOINC should always run with no error message about disk space UNLESS for some reason you were copying or backing up large files and that free space just happened (temporarily) to be reduced to a low value.

Do you recall doing anything like this at all??

Quote:
If I notice I need more free space for other software, how can I "purge" the disc memory BOINC is using up? Will exiting it work? Or do I need to delete certain working files?

The fact that you may give BOINC permission to use more space does NOT cause BOINC to actually use more than it otherwise would. There is nothing to free up. You don't need to worry about it. BOINC is not using one extra byte, no matter what preferences you set.

Quote:
In case it means anything: BOINC is not installed on my C drive, but my G drive, which is a partition of my HDD and is the default for program installation. BOINC did recognize G as the drive to install to.

This is perfectly fine and no problem at all.

Cheers,
Gary.

Jord
Joined: 26 Jan 05
Posts: 2952
Credit: 5893653
RAC: 16

RE: Hey Jord, You actually

Message 19691 in response to message 19689

Quote:

Hey Jord,

You actually asked the correct key questions and I think everyone has missed the critical answer.

You asked:-

Quote:
What does it say on both sites for:
Do work while computer is in use? ??
Do work only between the hours of ??

and Guido answered:-

Quote:
For both sites it says "no" and "(no restriction)". I believe these are the default as I don't recall changing them.


I have missed the critical answer. I overlooked the "no" .. Ouch.

Must go to bed earlier, I think. ;)

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.