I gather you are fine with only a couple of X16 slots because you host the majority of your gpus on the 1X slots via extenders.
The VRM solution for this board seems reasonable though the review only tested with a 3900X and not a 5950X.
Assuming I was going to use the proposed MB for gpu crunching it appears that the x16 to x1 ribbon cables (with added on power connectors) should work "fine" in a mining frame. If I want to run a pair of gpus directly on the MB it should be "fine" too.
Maybe I can find that list of 3 long slot B550 motherboards? But other than that it looks like I would spend almost $400 for the "Workstation" model in the Asus line.
I can't see doing that if I am also going to be buying a CPU liquid cooler.
So I am guessing something like this is what I should shoot for, for the home of a 5950x cpu to do heavy crunching.
Tom M
A Proud member of the O.F.A. (Old Farts Association). Be well, do good work, and keep in touch.® (Garrison Keillor) I want some more patience. RIGHT NOW!
If you can afford to keep buying new motherboards which all cost more than $100, you should be able to budget $80 for a AIO cpu cooler.
Let me see if I can find the link you posted.
A Proud member of the O.F.A. (Old Farts Association). Be well, do good work, and keep in touch.® (Garrison Keillor) I want some more patience. RIGHT NOW!
If you can afford to keep buying new motherboards which all cost more than $100, you should be able to budget $80 for a AIO cpu cooler.
Let me see if I can find the link you posted.
I can't find the link. Do you remember which you posted?
A Proud member of the O.F.A. (Old Farts Association). Be well, do good work, and keep in touch.® (Garrison Keillor) I want some more patience. RIGHT NOW!
A Proud member of the O.F.A. (Old Farts Association). Be well, do good work, and keep in touch.® (Garrison Keillor) I want some more patience. RIGHT NOW!
One of the issues with my noctuea air CPU cooler has been clearance in my main mining frame.
It looks like this new model addresses that issue.
Tom M
A Proud member of the O.F.A. (Old Farts Association). Be well, do good work, and keep in touch.® (Garrison Keillor) I want some more patience. RIGHT NOW!
One of the issues with my noctuea air CPU cooler has been clearance in my main mining frame.
It looks like this new model addresses that issue.
Tom M
Looks a similar size to mine (whatever the other make is): 6 inches cubed. It presses against the side when I put it on, but only just. I had to adjust the fans slightly. But then again, I don't actually put the side on :-)
If this page takes an hour to load, reduce posts per page to 20 in your settings, then the tinpot 486 Einstein uses can handle it.
I gather you are fine with
)
I gather you are fine with only a couple of X16 slots because you host the majority of your gpus on the 1X slots via extenders.
The VRM solution for this board seems reasonable though the review only tested with a 3900X and not a 5950X.
Keith Myers wrote:I gather
)
Assuming I was going to use the proposed MB for gpu crunching it appears that the x16 to x1 ribbon cables (with added on power connectors) should work "fine" in a mining frame. If I want to run a pair of gpus directly on the MB it should be "fine" too.
Maybe I can find that list of 3 long slot B550 motherboards? But other than that it looks like I would spend almost $400 for the "Workstation" model in the Asus line.
I can't see doing that if I am also going to be buying a CPU liquid cooler.
So I am guessing something like this is what I should shoot for, for the home of a 5950x cpu to do heavy crunching.
Tom M
A Proud member of the O.F.A. (Old Farts Association). Be well, do good work, and keep in touch.® (Garrison Keillor) I want some more patience. RIGHT NOW!
If you can afford to keep
)
If you can afford to keep buying new motherboards which all cost more than $100, you should be able to budget $80 for a AIO cpu cooler.
Keith Myers wrote: If you
)
Let me see if I can find the link you posted.
A Proud member of the O.F.A. (Old Farts Association). Be well, do good work, and keep in touch.® (Garrison Keillor) I want some more patience. RIGHT NOW!
Tom M wrote: Keith Myers
)
I can't find the link. Do you remember which you posted?
A Proud member of the O.F.A. (Old Farts Association). Be well, do good work, and keep in touch.® (Garrison Keillor) I want some more patience. RIGHT NOW!
Search for the EVGA CLC-280
)
Search for the EVGA CLC-280 on Amazon. The good $73 price is gone, but there are plenty around $85-89 and here is one for $80.
CLC-280 AIO
Keith Myers wrote: Search
)
Ordered.
A Proud member of the O.F.A. (Old Farts Association). Be well, do good work, and keep in touch.® (Garrison Keillor) I want some more patience. RIGHT NOW!
https://www.tomshardware.com/
)
https://www.tomshardware.com/news/noctua-nh-d12l-cpu-cooler
One of the issues with my noctuea air CPU cooler has been clearance in my main mining frame.
It looks like this new model addresses that issue.
Tom M
A Proud member of the O.F.A. (Old Farts Association). Be well, do good work, and keep in touch.® (Garrison Keillor) I want some more patience. RIGHT NOW!
Tom M
)
Looks a similar size to mine (whatever the other make is): 6 inches cubed. It presses against the side when I put it on, but only just. I had to adjust the fans slightly. But then again, I don't actually put the side on :-)
If this page takes an hour to load, reduce posts per page to 20 in your settings, then the tinpot 486 Einstein uses can handle it.
Tom M
)
being 4U compatible, i see that being a popular option for the home server guys :)
_________________________________________________________________________