Gravitational Wave search O2 All-Sky Tuning ("O2AS20-500T")

Forums › Technical News

Bernd Machenschalk
Bernd Machenschalk
Moderator
Administrator
Joined: 15 Oct 04
Posts: 4332
Credit: 251670587
RAC: 35424
6 Feb 2018 6:30:24 UTC
Topic 213199
(moderation:
    )

    On the weekend we began to send out the first tasks of the first search for Continuous Gravitational Waves in "O2" data, i.e. data from the second Observation Run of the LIGO detectors. This "Tuning" run will be a short one (targeted for about a month) where we will test and tune the application and setup for the actual analysis run, which will follow immediately (or will even be started before the tuning run is fully finished).

    As the name indicates, this will be an all-sky search, covering the frequencies 20-500Hz. For the tuning run, however, we will focus on a few smaller frequency bands in that range.

    Currently this is marked as a "Beta test" application (meaning you have to accept "Beta work" in your preferences to get it), but this is meant to be changed soon (today or tomorrow). We still have trouble building the OSX version of the application, so there currently is no such for Macs, but that should get fixed within this week.

    BM

    Darren Peets
    Darren Peets
    Joined: 19 Nov 09
    Posts: 37
    Credit: 108615384
    RAC: 46249

    On my system, it looks like

    6 Feb 2018 10:30:02 UTC
    Message 164158
    (moderation:
      )

      On my system, it looks like they take ~40% longer than the most recent chunks of LAT data, which is about what I recall for O1-High (although I guess LAT can be highly variable).

      Consider tuning the number of "T"s in "Gravittational"...

      Bernd Machenschalk
      Bernd Machenschalk
      Moderator
      Administrator
      Joined: 15 Oct 04
      Posts: 4332
      Credit: 251670587
      RAC: 35424

      Thanks!

      6 Feb 2018 12:04:49 UTC
      Message 164159
      (moderation:
        )

        Thanks!

        BM

        MarkJ
        MarkJ
        Joined: 28 Feb 08
        Posts: 437
        Credit: 139002861
        RAC: 0

        Are we expecting similar

        6 Feb 2018 12:05:58 UTC
        Message 164160
        (moderation:
          )

          Are we expecting similar memory usage with the O2 run to what we had in the O1 run? (ie up to 1500MB per work unit).

          BOINC blog

          Bernd Machenschalk
          Bernd Machenschalk
          Moderator
          Administrator
          Joined: 15 Oct 04
          Posts: 4332
          Credit: 251670587
          RAC: 35424

          Actually there were three

          6 Feb 2018 13:18:00 UTC
          Message 164162
          (moderation:
            )

            Actually there were three "O1" runs ("O1AS" (all-sky), "O1MD" (multi-directed) and the recent "O1Spot" (single-directional)).The "directional" searches were looking up to much higher frequencies than the "all-sky" search, that's where most of the memory usage came from.

            I think the O2 all-sky run will be in the same order of magnitude than the O1 all-sky run (250-300MB), possibly up to a factor of two higher (600MB). Our model of memory-usage per data is certainly not perfect, we'll use the "tuning" run to improve this as well.

            BM

            Thyme Lawn
            Thyme Lawn
            Joined: 13 Jun 15
            Posts: 7
            Credit: 12137755
            RAC: 0

            9 tasks successfully

            7 Feb 2018 10:24:18 UTC
            Message 164180
            (moderation:
              )

              9 tasks successfully completed and 1 failed with exit status 13 on my i7 Windows 10 Pro system so far.

              Runtime is comparable to that reported by Darren Peets (~9 hours and 1000 credits for O2, ~5 hours and 693 credits for FGRP5).

              The failure ran for 4 hours and was reissued to and successfully completed by a Linux system (WU h1_0117.90_O2C01Cl1In1__O2AS20-500T_118.00Hz_83.

              End of stderr on my system:

              298..............ERROR: Stepped outside the coarse grid (79:14971:15049:15461)!

              2018-02-05 22:12:33.5469 (12396) [CRITICAL]: ERROR: MAIN() returned with error '13'
FPU status flags:  COND_2 PRECISION
2018-02-05 22:12:33.5469 (12396) [normal]: done. calling boinc_finish(13).
22:12:33 (12396): called boinc_finish

              And on the Linux system:

              685........c

              ...........
2018-02-06 12:21:05.2553 (15172) [normal]: Finished main analysis.
2018-02-06 12:21:05.2557 (15172) [normal]: Recalculating statistics for the final toplist...
2018-02-06 12:24:56.9140 (15172) [normal]: Finished recalculating toplist statistics.
FPU status flags:  COND_1 PRECISION
2018-02-06 12:24:57.2983 (15172) [normal]: done. calling boinc_finish(0).
12:24:57 (15172): called boinc_finish

              The first task from the WU was sent to another Linux system and immediately failed with exit status 1 and the following in stderr (all 9 O2 tasks on that system have failed in the same way):

              einstein_O2AS20-500T_0.01_x86_64-pc-linux-gnu: option `--getMaxFperSeg' was set more than once!

              Usage: einstein_O2AS20-500T_0.01_x86_64-pc-linux-gnu [-h|--help] [-v|--version] [@<config-file>] [--log] [--semiCohToplist] --DataFiles1 [--skyRegion] [--numSkyPartitions] [--partitionIndex] [--skyGridFile] [--dAlpha] [--dDelta] [-f|--Freq] [--dFreq] [-b|--FreqBand] [--f1dot] [--df1dot] [--f1dotBand] [--f2dot] [--df2dot] [--f2dotBand] [--f3dot] [--df3dot] [--f3dotBand] [--peakThrF] [-m|--mismatch1] [--gridType1] [--metricType1] [-g|--gammaRefine] [-G|--gamma2Refine] [-o|--fnameout] [--fnameChkPoint] [-n|--nCand1] [--printCand1] [--refTime] [--ephemEarth] [--ephemSun] [--minStartTime1] [--maxStartTime1] [--printFstat1] [--assumeSqrtSX] [--nStacksMax] [-T|--tStack] [--segmentList] [--recalcToplistStats] [--loudestSegOutput] [--computeBSGL] [--Fstar0sc] [--oLGX] [--getMaxFperSeg] [--SortToplist] [--FstatMethod] [--FstatMethodRecalc]

              2018-02-03 15:22:42.9481 (2622) [CRITICAL]: ERROR: MAIN() returned with error '1'
FPU status flags:
2018-02-03 15:22:42.9481 (2622) [normal]: done. calling boinc_finish(1).
15:22:42 (2622): called boinc_finish

               
               

              "The ultimate test of a moral society is the kind of world that it leaves to its children." - Dietrich Bonhoeffer

              Bernd Machenschalk
              Bernd Machenschalk
              Moderator
              Administrator
              Joined: 15 Oct 04
              Posts: 4332
              Credit: 251670587
              RAC: 35424

              The first tasks instantiated

              7 Feb 2018 11:17:00 UTC
              Message 164182
              (moderation:
                )

                The first tasks instantiated from the first <500 workunits had indeed been generated with a broken command-line, so they failed immediately, but without wasting any computing time. This was fixed; all tasks generated after Saturday noon (UTC) should not exhibit this problem.

                "ERROR: Stepped outside the coarse grid" is pretty unusual, in particular if this doesn't happen on a different host. I'll take a look and try to reproduce it.

                BM

                DoctorNow
                Joined: 22 Jan 05
                Posts: 12
                Credit: 27391545
                RAC: 0

                Hi! I don't see an app to

                8 Feb 2018 10:57:57 UTC
                Message 164194
                (moderation:
                  )

                  Hi!

                  I don't see an app to select in my account, Beta option is ACTIVATED but since there MUST be at least one app selected I only get tasks from this instead of the Beta ones.

                  Is there a way to get tasks for this app which I probably don't see?

                  Life is Science, and Science rules. To the universe and beyond
                  Proud member of BOINC@Heidelberg

                  Bernd Machenschalk
                  Bernd Machenschalk
                  Moderator
                  Administrator
                  Joined: 15 Oct 04
                  Posts: 4332
                  Credit: 251670587
                  RAC: 35424

                  Thanks for the reminder.

                  8 Feb 2018 12:57:00 UTC
                  Message 164197
                  (moderation:
                    )

                    Thanks for the reminder. Should be fixed (i.e. available in your preferences) now.

                    BM

                    mmonnin
                    mmonnin
                    Joined: 29 May 16
                    Posts: 292
                    Credit: 3444726540
                    RAC: 537810

                    Bernd Machenschalk

                    8 Feb 2018 15:10:45 UTC
                    Message 164201 in response to message 164197
                    (moderation:
                      )

                      Bernd Machenschalk wrote:
                      Thanks for the reminder. Should be fixed (i.e. available in your preferences) now.

                       

                      Thank you, that helps.

                      Betreger
                      Betreger
                      Joined: 25 Feb 05
                      Posts: 992
                      Credit: 1610826702
                      RAC: 711244

                      Ah, that explains why haven't

                      8 Feb 2018 17:52:50 UTC
                      Message 164204 in response to message 164197
                      (moderation:
                        )

                        Ah, that explains why haven't been able to get any.

                        Comment viewing options

                        Select your preferred way to display the comments and click "Save settings" to activate your changes.

                        Forums › Technical News