"The board runs rock-stable" - if you mean stable when gaming, that can be very different from considering it stable for GPU computing.
I do not play. I support DC projects for almost 15 years now.
@Pollux_P3D: Ja, alles bekannt. 4 parallele GPU WUs unter Reservierung von 2 CPU Kernen (0,5 pro GPU WU) hat sich bei mir experimentell als das effizienteste Bearbeitungsschema erwiesen, wo also in minimaler Zeit ein Maximum an GPU WU Durchsatz erreicht wird.
Mit diesen Einstellungen wurden valide Ergebnisse erzielt. Nach erhalten der Parkes WUs aber trat anscheinend ein (von mir erst spät bemerktes) Problem auf.
Die verbleibenden zwei CPU Kerne (ich habe einen i5-2500K laufen), werden mit anderen CPU WUs ausgereizt.
Da ich hier anscheinend auf keine Hilfe hoffen kann, werde ich mich wohl mal erneut mit genau diesen WUs befassen, d.h. erstmal wieder auf eine WU runterstellen müssen.
Trotzdem Danke.
Michael.
RNA World - A Distributed Supercomputer to Advance RNA Research
I ran into the same or similar problem with my R9-290x running on a host with Linux OS. I swapped my 7970 with a R9-290x and most BRP6 tasks processed were marked invalid with over 60 tasks in total marked as invalid. I put the 7970 back in and tasks are validating again. The 290x was running default clock frequencies. I have not been able to find a solution for this. The same 290x processed BRP5 data okay.
I ran into the same or similar problem with my R9-290x running on a host with Linux OS... The 290x was running default clock frequencies. The same 290x processed BRP5 data okay.
Did you run single GPU WUs on your 290X when running into validation trouble or did your card process multiple WUs simultaneously at that time?
Michael.
RNA World - A Distributed Supercomputer to Advance RNA Research
Did you run single GPU WUs on your 290X when running into validation trouble or did your card process multiple WUs simultaneously at that time?
Michael.
I moved the R9-290x to another system running Windows 10. I had two tasks that completed when the card was processing one task at a time. One of those tasks validated while the other task is pending.
When I set the card to process three tasks at a time, three of those tasks have failed to validate while the rest are in a pending state.
Perhaps this is a limitation of what the 290x can handle with the new application? My 7970 cards are able to run 3 to 4 tasks at a time and those tasks are validating okay.
RE: "The board runs
)
I do not play. I support DC projects for almost 15 years now.
@Pollux_P3D: Ja, alles bekannt. 4 parallele GPU WUs unter Reservierung von 2 CPU Kernen (0,5 pro GPU WU) hat sich bei mir experimentell als das effizienteste Bearbeitungsschema erwiesen, wo also in minimaler Zeit ein Maximum an GPU WU Durchsatz erreicht wird.
Mit diesen Einstellungen wurden valide Ergebnisse erzielt. Nach erhalten der Parkes WUs aber trat anscheinend ein (von mir erst spät bemerktes) Problem auf.
Die verbleibenden zwei CPU Kerne (ich habe einen i5-2500K laufen), werden mit anderen CPU WUs ausgereizt.
Da ich hier anscheinend auf keine Hilfe hoffen kann, werde ich mich wohl mal erneut mit genau diesen WUs befassen, d.h. erstmal wieder auf eine WU runterstellen müssen.
Trotzdem Danke.
Michael.
RNA World - A Distributed Supercomputer to Advance RNA Research
I ran into the same or
)
I ran into the same or similar problem with my R9-290x running on a host with Linux OS. I swapped my 7970 with a R9-290x and most BRP6 tasks processed were marked invalid with over 60 tasks in total marked as invalid. I put the 7970 back in and tasks are validating again. The 290x was running default clock frequencies. I have not been able to find a solution for this. The same 290x processed BRP5 data okay.
Jeroen
RE: I ran into the same or
)
Did you run single GPU WUs on your 290X when running into validation trouble or did your card process multiple WUs simultaneously at that time?
Michael.
RNA World - A Distributed Supercomputer to Advance RNA Research
RE: Did you run single GPU
)
I moved the R9-290x to another system running Windows 10. I had two tasks that completed when the card was processing one task at a time. One of those tasks validated while the other task is pending.
When I set the card to process three tasks at a time, three of those tasks have failed to validate while the rest are in a pending state.
Perhaps this is a limitation of what the 290x can handle with the new application? My 7970 cards are able to run 3 to 4 tasks at a time and those tasks are validating okay.
Jeroen
Howdy Jeroen, I hope the (out
)
Howdy Jeroen,
I hope the (out soon ? ) R-390X can do better than that .
Bill