ambient air -- too cold?

merle van osdol
merle van osdol
Joined: 1 Mar 05
Posts: 513
Credit: 60724446
RAC: 0
Topic 197814

Lately at night it has been getting cold and I leave the window open right near (3 feet) my main cruncher.
Sometimes that air might be 32F. What would be the danger point for a rig to operate error-free at those kind of temperatures? Thanks

merle

What is freedom of expression? Without the freedom to offend, it ceases to exist.

— Salman Rushdie

mikey
mikey
Joined: 22 Jan 05
Posts: 11946
Credit: 1832590719
RAC: 218460

ambient air -- too cold?

Quote:
Lately at night it has been getting cold and I leave the window open right near (3 feet) my main cruncher.
Sometimes that air might be 32F. What would be the danger point for a rig to operate error-free at those kind of temperatures? Thanks

Probably not a lot unless it had too much moisture in it, I have seen rigs run inside freezers with no problems. I guess a hard drive could stick, but I wouldn't think that would be a big concern as it's sealed.

scole of TSBT
scole of TSBT
Joined: 2 Mar 05
Posts: 10
Credit: 632354348
RAC: 816145

I'd watch for condensation on

I'd watch for condensation on the case or anywhere it could form and drip on the board/gpu/disk/psu. The air in your house will have more moisture in it. If the case gets cold, then you close the window, the warm moist air of your house could make it sweat too.

Sid
Sid
Joined: 17 Oct 10
Posts: 160
Credit: 926718048
RAC: 284180

Sometimes I move my "mobile"

Sometimes I move my "mobile" box with Core Duo Q8300 and couple of same age videocards 4850 outside my house and it survives on temperature about 0F. Working fine on fresh air and all temperature sensors inside box show me temperature not less then 50F.
Moving outside is not dangerous but it is not true for moving inside.

merle van osdol
merle van osdol
Joined: 1 Mar 05
Posts: 513
Credit: 60724446
RAC: 0

thanks guys, looks like

thanks guys,
looks like moisture is the main concern.

merle

What is freedom of expression? Without the freedom to offend, it ceases to exist.

— Salman Rushdie

ExtraTerrestrial Apes
ExtraTerrestria...
Joined: 10 Nov 04
Posts: 770
Credit: 539744181
RAC: 151058

The chips themselves are

The chips themselves are happy at ~77 K during OC competitions with liquid nitrogen. Problems would be expected below ~30 K, where the dopants "freeze out". So don't overclock with liquid helium ;)

But cooling entire boxes you're far more likely to get mechanical or moisture problems before reaching those points.

MrS

Scanning for our furry friends since Jan 2002

merle van osdol
merle van osdol
Joined: 1 Mar 05
Posts: 513
Credit: 60724446
RAC: 0

I am now more concerned about

I am now more concerned about moisture at night with the window opened. I can understand about not quickly shutting the window. Perhaps do it in gradual steps but I don't want to take any chances. I moved the box to about 4 or 5 feet away from the window. The bottom of the case can get really cold when it's about 39 F. out there. It seems like at those low outside temps the humidity is always about 100% too. We don't have that many nights down here where the temp gets below freezing. Any other things to look out for. I don't need nightmares keeping me awake. :-)

merle

What is freedom of expression? Without the freedom to offend, it ceases to exist.

— Salman Rushdie

archae86
archae86
Joined: 6 Dec 05
Posts: 3145
Credit: 7056734931
RAC: 1601982

The way you get moisture in

The way you get moisture in cold equipment is to expose it to warmer air, which cools on contact, thus lowering the air temperature at the point of contact below the ambient air's dew point--and thus making condensation (which we call dew when we see it on the grass on the lawn). This is a real concern when one brings something like a tape recorder indoors after prolonged cold-soaking outside in the winter. Dry as our houses seem in winter, the dew point indoors is much higher than outdoors--water from human exhalation and perspiration, plus some other sources moves things up.

But under normal conditions (for those of us not using active chillers), EVERYTHING in your PC is warmer than room ambient, so incoming air is singularly unlikely to get chilled by contact with PC parts and thus be persuaded to leave behind a gift of liquid water.

Remember: dew point is a measure of absolute (not relative) humidity, and thus does not change just because a parcel of air gets heated or cooled.

merle van osdol
merle van osdol
Joined: 1 Mar 05
Posts: 513
Credit: 60724446
RAC: 0

RE: The way you get

Quote:

The way you get moisture in cold equipment is to expose it to warmer air, which cools on contact, thus lowering the air temperature at the point of contact below the ambient air's dew point--and thus making condensation (which we call dew when we see it on the grass on the lawn. This is a real concern when one brings something like a tape recorder indoors after prolonged cold-soaking outside in the winter. Dry as our houses seem in winter, the dew point indoors is much higher than outdoors--water from human exhalation and perspiration, plus some other sources moves things up.

But under normal conditions (for those of us not using active chillers), EVERYTHING in your PC is warmer than room ambient, so incoming air is singularly unlikely to get chilled by contact with PC parts and thus be persuaded to leave behind a gift of liquid water.

Remember: dew point is a measure of absolute (not relative) humidity, and thus does not change just because a parcel of air gets heated or cooled.

That was very informative. Thank you very much.

merle

What is freedom of expression? Without the freedom to offend, it ceases to exist.

— Salman Rushdie

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.