BRP5 Version 1.36 not running with Boinc 7.0.64

Forums › Problems and Bug Reports

Rechenkuenstler
Rechenkuenstler
Joined: 22 Aug 10
Posts: 138
Credit: 102567115
RAC: 0
28 Jun 2013 18:21:24 UTC
Topic 197031
(moderation:
    )

    Since BRP5 Version 1.36 is out, I've got computation errors on all BRP5 tasks. It seems to be a problem with creating and/or writing to file status.cpt
    Boinc Version is 7.0.64

    Updated another computer which was crunching BRP5 tasks successfully with an old Boinc Version 6.X to Boinc 7.0.64 and then there was no more progress on the task.

    I've switched back both computers from Boinc 7.0.64 to Boinc 7.0.42 and on both computers BRP5 is running successfully

    Here is an example error task
    http://einsteinathome.org/task/387531737

    Seraphim401
    Seraphim401
    Joined: 16 Sep 09
    Posts: 1
    Credit: 12474030
    RAC: 0

    BRP5 Version 1.36 not running with Boinc 7.0.64

    28 Jun 2013 21:32:13 UTC
    Message 116906
    (moderation:
      )

      Great to see that I'm not the only one with this problem.
      I'm also using Boinc Version 7.0.64.
      My gpu is 92% utilized,but the project shows no progress,it just stays it 0%.
      Hope this gets fixed soon,because I'm not downgrading.

      http://einsteinathome.org/task/387507144

      Gustav
      Gustav
      Joined: 13 Aug 10
      Posts: 4
      Credit: 8019583
      RAC: 0

      I see the same thing starting

      29 Jun 2013 20:19:05 UTC
      Message 116907
      (moderation:
        )

        I see the same thing starting a couple days ago. All BRP5 tasks restart every few minutes and eventually fail, getting marked as errored tasks.

        I am running Windows 7 with an ATI Radeon HD 5700 series GPU. BOINC version is 7.0.64 (x64).

        Example error task:
        http://einsteinathome.org/task/387613382

        When the task eventually completes, the output files cannot be found:

        6/28/2013 8:03:47 PM | Einstein@Home | Computation for task PA0079_01251_348_1 finished
        6/28/2013 8:03:47 PM | Einstein@Home | Output file PA0079_01251_348_1_0 for task PA0079_01251_348_1 absent
        6/28/2013 8:03:47 PM | Einstein@Home | Output file PA0079_01251_348_1_1 for task PA0079_01251_348_1 absent
        6/28/2013 8:03:47 PM | Einstein@Home | Output file PA0079_01251_348_1_2 for task PA0079_01251_348_1 absent

        The log on the web site reports "too many exit(0)s" and many messages about status.cpt unavailable.

        7.0.64

        too many exit(0)s

        Checkpoint file unavailable: status.cpt (No such file or directory).


        Artur Anikeich
        Artur Anikeich
        Joined: 19 Feb 12
        Posts: 3
        Credit: 18124265
        RAC: 6383

        I think I've got the same

        30 Jun 2013 8:16:00 UTC
        Message 116908
        (moderation:
          )

          I think I've got the same problem even with Boinc 7.0.28.
          I canceled this task http://einsteinathome.org/task/387465118, it's too long ran without any progress..
          Although
          [23:45:45][3840][INFO ] Checkpoint file unavailable: status.cpt (No such file or directory). seems to be normal,
          there is something wrong between [01:08:08] and [06:03:45]:

          [00:46:17][4676][INFO ] Checkpoint committed!
[00:57:13][4676][INFO ] Checkpoint committed!
[01:08:08][4676][INFO ] Checkpoint committed!
[06:03:45][4676][INFO ] OpenCL shutdown complete!
[06:03:45][4676][INFO ] Statistics: count dirty SumSpec pages 1824 (not checkpointed), Page Size 1024, fundamental_idx_hi-window_2: 1100505
[06:03:45][4676][INFO ] Data processing finished successfully!


          Checkpoint set to every 10 minutes, and in Binary Radio Pulsar Search (Perseus Arm Survey) v1.34 (opencl-ati) it worked fine. Example: http://einsteinathome.org/task/385491213

          Bikeman (Heinz-Bernd Eggenstein)
          Bikeman (Heinz-...
          Moderator
          Joined: 28 Aug 06
          Posts: 3522
          Credit: 760743540
          RAC: 1112360

          Thanks for reporting

          30 Jun 2013 15:52:05 UTC
          Message 116909
          (moderation:
            )

            Thanks for reporting this.

            We do see an increased failure rate for this app version, but by no means are all tasks failing, so there must be some combination of things that trigger this problem.

            It seems that when this problem occurs, the task is interrupted (suspended??) before it can make any progress that would be written to the checkpoint file. So after a restart such a task begins from scratch, is again terminated before reaching the first checkpoint etc... Eventually BOINC will terminate the task with "too many exits".

            The big question is what is causing the task to stop only seconds after starting. If the task would just crash, the error messages would be different. The same for memory shortages (and the log for the NVIDIA tasks indicate the amount of free mem, more than enough).

            Could those who have experienced this problem please report what is their setting for "Leave tasks in memory while suspended?" in the Computing preferences (for the venue matching the hosts in question)?

            If you want to help us in tracking down this problem and you are experienced in BOINC configuration, you can also set some debugging flags in the cc_config.xml, restart BOINC and report back the messages in the event log after seeing the problem happening. I think the flags that might help are

            (see http://boinc.berkeley.edu/wiki/Client_configuration)

            HBE

            Artur Anikeich
            Artur Anikeich
            Joined: 19 Feb 12
            Posts: 3
            Credit: 18124265
            RAC: 6383

            "Leave tasks in memory while

            30 Jun 2013 17:16:56 UTC
            Message 116910
            (moderation:
              )

              "Leave tasks in memory while suspended" is not checked.

              30/06/2013 19:04:15 | Einstein@Home | [coproc] Assigning ATI instance 0 to PA0071_00551_267_3
30/06/2013 19:04:15 | Einstein@Home | [task] task_state=EXECUTING for PA0071_00551_267_3 from start
30/06/2013 19:04:15 | Einstein@Home | Restarting task PA0071_00551_267_3 using einsteinbinary_BRP5 version 136 (opencl-ati) in slot 3
30/06/2013 19:05:16 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
30/06/2013 19:06:16 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
...
30/06/2013 19:14:16 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
30/06/2013 19:14:17 | Einstein@Home | [checkpoint] result PA0071_00551_267_3 checkpointed
30/06/2013 19:15:16 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
...
30/06/2013 19:23:16 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
30/06/2013 19:24:16 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
30/06/2013 19:24:17 | Einstein@Home | [checkpoint] result PA0071_00551_267_3 checkpointed
30/06/2013 19:25:16 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
...
30/06/2013 19:32:16 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
30/06/2013 19:33:11 | World Community Grid | General prefs: from World Community Grid (last modified 03-Nov-2012 23:26:52)
...
30/06/2013 19:33:15 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
30/06/2013 19:33:16 | Einstein@Home | task LATeah0032U_688.0_83160_0.0_1 resumed by user
30/06/2013 19:33:36 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
30/06/2013 19:33:36 | Einstein@Home | [task] task_state=EXECUTING for LATeah0032U_688.0_83160_0.0_1 from start
30/06/2013 19:33:36 | Einstein@Home | Restarting task LATeah0032U_688.0_83160_0.0_1 using hsgamma_FGRP2 version 109 in slot 1
30/06/2013 19:33:38 | Einstein@Home | [task] task_state=SUSPENDED for LATeah0032U_688.0_83160_0.0_1 from suspend
30/06/2013 19:33:55 | Einstein@Home | [task] task_state=EXECUTING for LATeah0032U_688.0_83160_0.0_1 from unsuspend
30/06/2013 19:33:56 | Einstein@Home | [task] task_state=SUSPENDED for LATeah0032U_688.0_83160_0.0_1 from suspend
30/06/2013 19:34:15 | Einstein@Home | [task] task_state=EXECUTING for LATeah0032U_688.0_83160_0.0_1 from unsuspend
30/06/2013 19:34:16 | Einstein@Home | [task] task_state=SUSPENDED for LATeah0032U_688.0_83160_0.0_1 from suspend
30/06/2013 19:34:35 | Einstein@Home | [task] task_state=EXECUTING for LATeah0032U_688.0_83160_0.0_1 from unsuspend
30/06/2013 19:34:36 | Einstein@Home | [task] task_state=SUSPENDED for LATeah0032U_688.0_83160_0.0_1 from suspend
30/06/2013 19:34:55 | Einstein@Home | [task] task_state=EXECUTING for LATeah0032U_688.0_83160_0.0_1 from unsuspend
30/06/2013 19:34:55 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
30/06/2013 19:34:56 | Einstein@Home | [task] task_state=SUSPENDED for LATeah0032U_688.0_83160_0.0_1 from suspend
...
30/06/2013 19:35:55 | Einstein@Home | [task] task_state=EXECUTING for LATeah0032U_688.0_83160_0.0_1 from unsuspend
30/06/2013 19:35:55 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
30/06/2013 19:35:56 | Einstein@Home | [task] task_state=SUSPENDED for LATeah0032U_688.0_83160_0.0_1 from suspend
...
...
30/06/2013 19:43:35 | Einstein@Home | [task] task_state=EXECUTING for LATeah0032U_688.0_83160_0.0_1 from unsuspend
30/06/2013 19:43:35 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
30/06/2013 19:43:36 | Einstein@Home | [task] task_state=SUSPENDED for LATeah0032U_688.0_83160_0.0_1 from suspend
...
30/06/2013 19:44:35 | Einstein@Home | [task] task_state=EXECUTING for LATeah0032U_688.0_83160_0.0_1 from unsuspend
30/06/2013 19:44:35 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3
30/06/2013 19:44:36 | Einstein@Home | [task] task_state=SUSPENDED for LATeah0032U_688.0_83160_0.0_1 from suspend
...
30/06/2013 19:45:35 | Einstein@Home | [task] task_state=EXECUTING for LATeah0032U_688.0_83160_0.0_1 from unsuspend
30/06/2013 19:45:35 | Einstein@Home | [coproc] ATI instance 0: confirming for PA0071_00551_267_3


              After I resumed LATeah0032U_688.0_83160_0.0_1 progress bar stopped at 1.938%, although time goes on, and there is no more "checkpointed". This time einsteinbinary_BRP5_1.36_windows_x86_64__opencl-ati.exe running without interruptions.
              is not set because it generates too many messages about the state of the network.
              Percentage of the task is correct on the graphics, by the way.

              Bikeman (Heinz-Bernd Eggenstein)
              Bikeman (Heinz-...
              Moderator
              Joined: 28 Aug 06
              Posts: 3522
              Credit: 760743540
              RAC: 1112360

              Thanks! Interesting...

              30 Jun 2013 19:58:47 UTC
              Message 116911 in response to message 116910
              (moderation:
                )

                Thanks!

                Interesting... There is a lot of stop-and-go going on, this time for the LAT task, after 19:33:36 in your log.

                In general, all settings that are related to suspending tasks might be interesting when this kind of problem happens.

                Background: the new app version 1.36 fixes a problem in the BOINC API part, which caused the previous app versions to ignore suspend requests in many circumstances. Now that this is fixed and the app really does suspend when asked to do so by the core client, this might cause other problems when BOINC, for some yet unknown reasons, is excessively suspending and resuming in short intervals.

                Those who experience this problem might want to try settings that minimize suspension of the app, e.g. allow GPU tasks while host is in use.

                Thanks for the feedback
                HB

                Bikeman (Heinz-Bernd Eggenstein)
                Bikeman (Heinz-...
                Moderator
                Joined: 28 Aug 06
                Posts: 3522
                Credit: 760743540
                RAC: 1112360

                For now, the version 1.36 was

                30 Jun 2013 22:02:42 UTC
                Message 116912 in response to message 116911
                (moderation:
                  )

                  For now, the version 1.36 was deprecated. However, to solve the problem, those who experienced this problem can attach to Albert@Home at http://albert.phys.uwm and try to reproduce the problem with the debugging settings I mentioned above.

                  Sorry for the inconveniences
                  HBE

                  Artur Anikeich
                  Artur Anikeich
                  Joined: 19 Feb 12
                  Posts: 3
                  Credit: 18124265
                  RAC: 6383

                  RE: Interesting... There

                  1 Jul 2013 3:18:48 UTC
                  Message 116913 in response to message 116911
                  (moderation:
                    )

                    Quote:

                    Interesting... There is a lot of stop-and-go going on, this time for the LAT task, after 19:33:36 in your log.


                    Well, it is because option "use at most _ % CPU time" was set to 5 %. With previous version of app there was no problem with that.

                    Gustav
                    Gustav
                    Joined: 13 Aug 10
                    Posts: 4
                    Credit: 8019583
                    RAC: 0

                    "Leave applications in memory

                    1 Jul 2013 6:30:26 UTC
                    Message 116914 in response to message 116911
                    (moderation:
                      )

                      "Leave applications in memory while suspended" is checked.

                      "Use at most _% CPU time" is set to 75%. Setting it to 100% CPU time doesn't fix the issue.

                      Here is the output with the requested debug flags. I removed other tasks and SUSPENDING/EXECUTING messages.

                      6/30/2013 11:11:37 PM | Einstein@Home | [coproc] Assigning ATI instance 0 to PA0079_01171_369_1
6/30/2013 11:11:37 PM | Einstein@Home | [task] task_state=EXECUTING for PA0079_01171_369_1 from start
6/30/2013 11:11:37 PM | Einstein@Home | Restarting task PA0079_01171_369_1 using einsteinbinary_BRP5 version 136 (opencl-ati) in slot 4
6/30/2013 11:12:38 PM | Einstein@Home | [coproc] ATI instance 0: confirming for PA0079_01171_369_1
6/30/2013 11:13:38 PM | Einstein@Home | [coproc] ATI instance 0: confirming for PA0079_01171_369_1
6/30/2013 11:14:38 PM | Einstein@Home | [coproc] ATI instance 0: confirming for PA0079_01171_369_1
6/30/2013 11:14:45 PM | Einstein@Home | Restarting PA0079_01171_369_1 - message timeout
6/30/2013 11:14:46 PM | Einstein@Home | [task] Process for PA0079_01171_369_1 exited, exit code 0, task state 1
6/30/2013 11:14:46 PM | Einstein@Home | Task PA0079_01171_369_1 exited with zero status but no 'finished' file
6/30/2013 11:14:46 PM | Einstein@Home | [task] task_state=UNINITIALIZED for PA0079_01171_369_1 from handle_premature_exit
6/30/2013 11:14:46 PM | Einstein@Home | [coproc] Assigning ATI instance 0 to PA0079_01171_369_1
6/30/2013 11:14:46 PM | Einstein@Home | [task] task_state=EXECUTING for PA0079_01171_369_1 from start
6/30/2013 11:14:46 PM | Einstein@Home | Restarting task PA0079_01171_369_1 using einsteinbinary_BRP5 version 136 (opencl-ati) in slot 4

                      Thanks,
                      Gustav

                      Rechenkuenstler
                      Rechenkuenstler
                      Joined: 22 Aug 10
                      Posts: 138
                      Credit: 102567115
                      RAC: 0

                      RE: Thanks! Interesting...

                      1 Jul 2013 9:46:27 UTC
                      Message 116915 in response to message 116911
                      (moderation:
                        )

                        Quote:

                        Thanks!

                        Interesting... There is a lot of stop-and-go going on, this time for the LAT task, after 19:33:36 in your log.

                        In general, all settings that are related to suspending tasks might be interesting when this kind of problem happens.

                        Background: the new app version 1.36 fixes a problem in the BOINC API part, which caused the previous app versions to ignore suspend requests in many circumstances. Now that this is fixed and the app really does suspend when asked to do so by the core client, this might cause other problems when BOINC, for some yet unknown reasons, is excessively suspending and resuming in short intervals.

                        Those who experience this problem might want to try settings that minimize suspension of the app, e.g. allow GPU tasks while host is in use.

                        Thanks for the feedback
                        HB

                        On my systems, "Leave in memory..." is activated. And on the big systems, I'm using only 5 of 8 cores to crunch LAT-tasks + 0.20CPU für BRP5. Configuration is just to use 80% of CPU usage. That's the only config-setting, which should cause suspension.
                        At the moment I'm not able to retest, cause I've downgraded to BOINC 7.0.42. Here everything works fine, even with App Version 1.36. And the workaround fixes the problem for Vista and Win7 OS.
                        So the starting point for an anlysis could be, what is the difference between Boinc 7.0.42 and 7.0.62. App version 1.36 works with the old Boinc, but not with the new one.

                        Comment viewing options

                        Select your preferred way to display the comments and click "Save settings" to activate your changes.

                        Forums › Problems and Bug Reports