2 , 3 or 4 way sli

Tom Plummer
Tom Plummer
Joined: 12 Mar 13
Posts: 13
Credit: 1260114
RAC: 0
Topic 196850

any one have any numbers on the use of 2 , 3 or 4 way sli setup.. vs just using 2 pc with 2 gpu in them?

thanks for the input..

Nobody316
Nobody316
Joined: 14 Jan 13
Posts: 141
Credit: 2008126
RAC: 0

2 , 3 or 4 way sli

Quote:

any one have any numbers on the use of 2 , 3 or 4 way sli setup.. vs just using 2 pc with 2 gpu in them?

thanks for the input..

It's not perfect or complete but have a look here....

http://www.dskag.at/images/Research/EinsteinGPUperformancelist.pdf

shows work unit times...

The speed at which 2 cards will drop the time a bit since the card slots are 16x and 8x and 8x and then 4x

PC setup MSI-970A-G46 AMD FX-8350 8 core OC'd 4.45GHz 16GB ram PC3-10700 Geforce GTX 650Ti Windows 7 x64 Einstein@Home

Tom Plummer
Tom Plummer
Joined: 12 Mar 13
Posts: 13
Credit: 1260114
RAC: 0

thanks for the numbers man.

thanks for the numbers man. was wondering if the scalling of sli was the same as gaming.. looks like it is.. 2 cards is optimal vs 3 or 4 cards..

meaning 2 pc with 2 gpu can out perform one pc with 4 gpu cards in it..

thanks for the input..

Holmis
Joined: 4 Jan 05
Posts: 1118
Credit: 1055935564
RAC: 0

SLI or AMD's Crossfire is not

SLI or AMD's Crossfire is not used when doing CUDA or OpenCL work. In the early days you had to turn those features of to be able to process the work but newer drivers handle that automatically.

juan BFP
juan BFP
Joined: 18 Nov 11
Posts: 839
Credit: 421443712
RAC: 0

Specialy in E@H and the way

Specialy in E@H and the way it´s works (by ussing a lot of PCIe resources), sure 2x2GPU hosts will perform better against a 1x4GPU host. But take something in mind, even to use a 2xGPU host at 100% you need a "better" MB (means X79 chipset or better for Intel). I have few "less capable" MB with 2xGPU on each, works but can´t get all the GPU potential due the incapacity of the chipset to handle the PCI-e requests.

lHj2ixL.jpg

 

Jeffy
Jeffy
Joined: 27 Mar 12
Posts: 4
Credit: 23426633
RAC: 0

As the others have said, each

As the others have said, each GPU acts as an individual card and tasks are not processed in parallel with other GPU's.

Tom Plummer
Tom Plummer
Joined: 12 Mar 13
Posts: 13
Credit: 1260114
RAC: 0

thanks for the info.. so

thanks for the info..

so each gpu card is set to run work units independent of each other?

Neil Newell
Neil Newell
Joined: 20 Nov 12
Posts: 176
Credit: 169699457
RAC: 0

Yes, as long as they are

Yes, as long as they are identical (if not I believe only the most powerful GPU will be used).

If you do have non-identical cards, you can create a little text file to use all GPUs - a search for "use_all_gpus" willl explain how to do it.

Tom Plummer
Tom Plummer
Joined: 12 Mar 13
Posts: 13
Credit: 1260114
RAC: 0

yes always use the same

yes always use the same gpu..

for sli.

my under standing is that the task or work units run separate on each gpu.

no sli bridge connector on them is that correct?

thanks for the input.

Horacio
Horacio
Joined: 3 Oct 11
Posts: 205
Credit: 80557243
RAC: 0

SLI is a feature, intended

SLI is a feature, intended almost only for games, in which each GPU of the SLI set just renders a half (or 1/3 or 1/4) of each frame... Doing this the whole frame is drawn faster.

Now, for apps that use the multiprocessors of the GPU just for "maths" SLI is irrelevant, so it doesnt matter if the SLI bridge is installed or not and, with newer drivers, it shouldnt even matter if this feature is enabled or not by software. (On older drivers and on certain GPU models, it was needed to disable SLI to get better performances and in some cases it was needed to disable SLI to avoid faillures in the apps, but it never requiered to remove the SLI bridge).

While for SLI, you need equal GPUs, for number crunching you dont, but BOINC may need aditional steps to work. As you are using equal GPUs, BOINC should see all of them and each one will be running different tasks independently of what the other GPUs were doing.

But, there is trick, BOINC 7.0.28 has a bug and sometimes it doesnt detects all the GPU as equals and then it doesnt use all of them. You are using BOINC 7.0.28 and if this is happening you will see in the beggining of the event log (after starting BOINC) that there are GPUs marked as "not used".
There are 2 ways to fix this, the most recomended is to upgrade to the latest beta version of BOINC (currently 7.0.56, which is a release candidate) or to use the cc_config.xml file to instruct BOINC to use all the GPUs...
There are a lot of threads with instructions on how to do any of this options, but if need more help, just ask ;D

Tom Plummer
Tom Plummer
Joined: 12 Mar 13
Posts: 13
Credit: 1260114
RAC: 0

as I suspected. so each

as I suspected.

so each gpu will be used independent of each of other..no sli interconnect.
then how does the number of cores and the pci interface affect
the work units.

meaning that if I have 2 cards in system do I have to worry about the amount of
data that one card can use vs the pci bus transfer speed 16 x vs 8 vs 4..

I suspect that with each card separate the memory bandwidth in the card gpu will be the limiting factor and not the number of cell processors doing the work or the pci bus it is connected to since each card is independent of each other..

thanks for the input.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.