Can anyone describe in short how to install einstein@home on Raspi 2B?
I habe Raspbian Jessie (newest v.) installed, BOINC too, but the simple way via the BOINC manager does not work, no connection. Seti@home and Universe@home do perfectly on 2B.
Can anyone describe in short how to install einstein@home on Raspi 2B?
I habe Raspbian Jessie (newest v.) installed, BOINC too, but the simple way via the BOINC manager does not work, no connection. Seti@home and Universe@home do perfectly on 2B.
Thanks ... :)
Do. sudo apt-get update then sudo apt-get upgrade. This should update OpenSSL which should fix your problem. Then try to add E@H again.
I'm running Odrobian. But Ubuntu should be fine too.
RE: Odroid-C2 - Are you running w/micro SD card or emmc card? if sd any issues with corruption. Their site talks about the reliability of their emmc cards.
Can anyone describe in short how to install einstein@home on Raspi 2B?
I habe Raspbian Jessie (newest v.) installed, BOINC too, but the simple way via the BOINC manager does not work, no connection. Seti@home and Universe@home do perfectly on 2B.
Thanks ... :)
Do. sudo apt-get update then sudo apt-get upgrade. This should update OpenSSL which should fix your problem. Then try to add E@H again.
I'm running Odrobian. But Ubuntu should be fine too.
RE: Odroid-C2 - Are you running w/micro SD card or emmc card? if sd any issues with corruption. Their site talks about the reliability of their emmc cards.
Im running a 8gb emmc. And Yes I have some Issues with it(I guess it's the emmc). Sometimes when copy large amount of data the device is freezing. Then in HTOP the copy-process goes to D-State. The only way to clear this is to switch it on and of.
This happends on both of my C2's. But with the reliability, maybe ask me in 2 Years ;)
While in the computer shop picked up a no-name 5 port 40w USB charger. Probably a bit under powered for the Pi3's but it seems to be holding up okay running 4 of them. I will leave it running for a week before deciding if I will get another one or not.
I didn't want to get the Anker because they now boost the voltage which I suspect will upset the Pi3. There is probably only one way to find out if that is true if nobody here has them powering their Pi's.
I re-imaged the possibly faulty Pi3 onto a new SD card and have fired it up, hopefully it will work.
To clarify: will the odroid c2 crunch out of the box with boinc or does it require the software mods that you have made?
The ODROID-C2 can crunch "nearly" out of the box. Using the ARM-32bit-App.
You only need a app_info.xml and the 1.47NEON BRP-App.
But the Run-Time is more than the double of my App-Version.
To clarify: will the odroid c2 crunch out of the box with boinc or does it require the software mods that you have made?
The ODROID-C2 can crunch "nearly" out of the box. Using the ARM-32bit-App.
You only need a app_info.xml and the 1.47NEON BRP-App.
But the Run-Time is more than the double of my App-Version.
Would you provide contents of the app_info.xml file? The reason I ask is that I have ordered a Odroid-C2 but am concerned about the running temp on the C2. If the temps are manageable then I can see using these as another node type to throw into the mix. I am also curious about their robotic applications.
I didn't want to get the Anker because they now boost the voltage which I suspect will upset the Pi3. There is probably only one way to find out if that is true if nobody here has them powering their Pi's.
Can you share more about this voltage boosting? USB Spec is good for up to 5.25 V. Are you referring to their IQ Power feature that makes it compatible with Qualcomm Quck Charging ( http://www.androidauthority.com/quick-charge-explained-563838/)? If so, this feature only kicks in with compatible devices.
Can anyone describe in short
)
Can anyone describe in short how to install einstein@home on Raspi 2B?
I habe Raspbian Jessie (newest v.) installed, BOINC too, but the simple way via the BOINC manager does not work, no connection. Seti@home and Universe@home do perfectly on 2B.
Thanks ... :)
RE: Can anyone describe in
)
Do.
sudo apt-get updatethensudo apt-get upgrade. This should update OpenSSL which should fix your problem. Then try to add E@H again.My YouTube Channel: https://www.youtube.com/user/KF7IJZ
Follow me on Twitter: https://twitter.com/KF7IJZ
RE: I'm running Odrobian.
)
RE: Odroid-C2 - Are you running w/micro SD card or emmc card? if sd any issues with corruption. Their site talks about the reliability of their emmc cards.
Perfect, thanks ! It's now
)
Perfect, thanks ! It's now running on 3B and 2B.
RE: RE: I'm running
)
Im running a 8gb emmc. And Yes I have some Issues with it(I guess it's the emmc). Sometimes when copy large amount of data the device is freezing. Then in HTOP the copy-process goes to D-State. The only way to clear this is to switch it on and of.
This happends on both of my C2's. But with the reliability, maybe ask me in 2 Years ;)
While in the computer shop
)
While in the computer shop picked up a no-name 5 port 40w USB charger. Probably a bit under powered for the Pi3's but it seems to be holding up okay running 4 of them. I will leave it running for a week before deciding if I will get another one or not.
I didn't want to get the Anker because they now boost the voltage which I suspect will upset the Pi3. There is probably only one way to find out if that is true if nobody here has them powering their Pi's.
I re-imaged the possibly faulty Pi3 onto a new SD card and have fired it up, hopefully it will work.
MarksRpiCluster
RE: I'm running Odrobian.
)
To clarify: will the odroid c2 crunch out of the box with boinc or does it require the software mods that you have made?
RE: To clarify: will the
)
The ODROID-C2 can crunch "nearly" out of the box. Using the ARM-32bit-App.
You only need a app_info.xml and the 1.47NEON BRP-App.
But the Run-Time is more than the double of my App-Version.
RE: RE: To clarify: will
)
Would you provide contents of the app_info.xml file? The reason I ask is that I have ordered a Odroid-C2 but am concerned about the running temp on the C2. If the temps are manageable then I can see using these as another node type to throw into the mix. I am also curious about their robotic applications.
RE: I didn't want to get
)
Can you share more about this voltage boosting? USB Spec is good for up to 5.25 V. Are you referring to their IQ Power feature that makes it compatible with Qualcomm Quck Charging (
http://www.androidauthority.com/quick-charge-explained-563838/)? If so, this feature only kicks in with compatible devices.
My YouTube Channel: https://www.youtube.com/user/KF7IJZ
Follow me on Twitter: https://twitter.com/KF7IJZ