Questions, comments and problems on new Fermi LAT gamma-ray pulsar search

Bikeman (Heinz-Bernd Eggenstein)
Bikeman (Heinz-...
Moderator
Joined: 28 Aug 06
Posts: 3522
Credit: 686139064
RAC: 549146

RE: Since a few days I have

Quote:

Since a few days I have an increasing number of taks, that ends up with "Error while computing" after run times shortly under 300[s]. So my last 8 tasks today. These tasks became donwnloaded about 5,5 days before. But a few files are running nicely.

Kind regards
Martin

Hi

I checked some of them and the problem seems to be related to diskspace

Quote:

6.12.34

Maximum disk usage exceeded

]]>


HBE

astro-marwil
astro-marwil
Joined: 28 May 05
Posts: 511
Credit: 402974159
RAC: 1031849

RE: Hallo Bikeman ! RE:

Quote:

Hallo Bikeman !

Quote:
**** the problem seems to be related to diskspace

Thankyou for your work.
But I don´t understand this, as E@H uses at most 9GB, in the mean about 8.5GB of discspace but available are 15GB and 31 GB are free on the partition. So this should not be the problem, as far as I know. The CPU has 8GB of RAM available, but uses 3.5GB only, as seen in the taskmanager.
All other tasks are running well.
Do you have some suggestions?

Kind regards
Martin

transient
transient
Joined: 3 Jun 05
Posts: 62
Credit: 115835369
RAC: 0

There are three criteria that

There are three criteria that limit diskspace used. If you hit that limit with one of them you will see that message even if the limit isn't reached according to the other two criteria. As far as I know it works like that.

If for example you trigger the maximum percentage of total diskspace Boinc is allowed to use, it doesn't matter that Boinc is allowed to use 15 GB for one of the other two criteria.

I'd suggest you carefully review those three criteria.

MAGIC Quantum Mechanic
MAGIC Quantum M...
Joined: 18 Jan 05
Posts: 1695
Credit: 1043174294
RAC: 1367247

10/19/2011 3:25:34

10/19/2011 3:25:34 PM

[error] Can't create HTTP response output file projects/einstein.phys.uwm.edu/hsgamma_FGRP1_0.23_windows_intelx86.exe

10/19/2011 3:25:34 PM Einstein@Home Backing off 1 hr 58 min 38 sec on download of hsgamma_FGRP1_0.23_windows_intelx86.exe

over the last 24+ hours

astro-marwil
astro-marwil
Joined: 28 May 05
Posts: 511
Credit: 402974159
RAC: 1031849

Thankyou transient for your

Thankyou transient for your response!

Quote:
There are three criteria that limit diskspace used. If you hit that limit with one of them you will see that message even if the limit isn't reached according to the other two criteria. As far as I know it works like that.

I checked this, but all seems to be set suitable.

Quote:
19.10.2011 23:58:42 | Einstein@Home | Aborting task LATeah0063T_544.0_7450_0.0_0: exceeded disk limit: 19.18MB > 19.07MB


Peculiar in the according remark in the event log is, that it shows MB instead of GB. But if it would be GB instead of MB either value would be larger than my limits.
So I increased my limits for diskspace. Let´s wait what happens.

Kind regards
Matin

robertmiles
robertmiles
Joined: 8 Oct 09
Posts: 127
Credit: 20986335
RAC: 78445

Do you have more than one

Do you have more than one BOINC project enabled? I've found that some BOINC versions assume that the allowed disk space must be divided equally among the various BOINC projects your computer is attached to, even if some of them use nowhere near that much disk space.

Bikeman (Heinz-Bernd Eggenstein)
Bikeman (Heinz-...
Moderator
Joined: 28 Aug 06
Posts: 3522
Credit: 686139064
RAC: 549146

Hi This could be related

Hi

This could be related to the per task disk limit. I'm not quite sure why the limit could be triggered at your PC but not on others. I suspect tho that the BOINC version you are using is maybe doing the accounting a bit differently. Still, this is something that Bernd will want to look at.

Thanks for the report.

HBE

robertmiles
robertmiles
Joined: 8 Oct 09
Posts: 127
Credit: 20986335
RAC: 78445

It's no longer triggered on

It's no longer triggered on any of my PCs, but I'm not sure if that's because I have since upgraded to a newer BOINC version (now 6.12.34) or because I have increased the disk space limits on all of these computers.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.