Nothing happened. Just to make sure I did this right (I am very new to Linux, sorry), I opened the project file (where the file is located) in terminal and then ran:
chmod 777 JPLEPH.405
There was no message or error. I then used sudo chmod 777 JPLEPH.405 and nothing happened.
Thank you for helping trouble shoot this- sorry I am not well-versed in Linux!
Should I detach from the project and then re-attach to download the project again? I will confirm the project runs just with the vanilla application and then go from there. I know it did, but I would like to make sure again.
No change- latest result (after chmod 777 JPLEPH.405):
Stderr output
<core_client_version>7.22.0</core_client_version>
<![CDATA[
<message>
process exited with code 11 (0xb, -245)</message>
<stderr_txt>
09:43:02 (137): [normal]: This Einstein@home App (v1.0 by petri33) was built at: Apr 28 2022 18:47:15
try detaching/resetting the project to force it to redownload all the setup files. and replace any of the special app files that got deleted.
the error message definitely points to a problem reading the JPLEPH.405 file. but I don't see any difference in how the stock app accesses this file and how this special app does it. they should be the same.
I reset the project, made sure the project files were no longer on the system. Re-attached, running vanilla and it is running (without the new app).
I am going to deplete the few work units that downloaded, then try the modification again. I will try 0.95 first then go from there. Also, just so I make sure of this, the "run manager" file goes into the same location as the 5 kernels and EAH_sleep?
maybe permissions on the .405
)
maybe permissions on the .405 file?
run this on it to open it up completely just to check.
chmod 777 JPLEPH.405if it says you don't have permission to do that, use sudo.
also, what is the file size reported? that ephem file should be like 9.3MB
_________________________________________________________________________
Nothing happened. Just to
)
Nothing happened. Just to make sure I did this right (I am very new to Linux, sorry), I opened the project file (where the file is located) in terminal and then ran:
chmod 777 JPLEPH.405
There was no message or error. I then used sudo chmod 777 JPLEPH.405 and nothing happened.
Thank you for helping trouble shoot this- sorry I am not well-versed in Linux!
It is 9.3mb.
no output = success on this
)
no output = success on this command. if it didnt work it would have given you some kind of error.
_________________________________________________________________________
Is the JPLEPH.405 different
)
Is the JPLEPH.405 different on a Windows system versus Linux?
Boca Raton Community HS
)
that I do not know. I would say no, but I don't know for sure.
_________________________________________________________________________
Should I detach from the
)
Should I detach from the project and then re-attach to download the project again? I will confirm the project runs just with the vanilla application and then go from there. I know it did, but I would like to make sure again.
you can certainly try
)
you can certainly try that.
did it not work after changing the permissions with chmod?
_________________________________________________________________________
No change- latest result
)
No change- latest result (after chmod 777 JPLEPH.405):
Stderr output
09:43:02 (137): [normal]: Start of BOINC application '../../projects/einstein.phys.uwm.edu/HSgammaPulsar_x86_64-pc-linux-gnu-opencl_v1.0'.
09:43:02 (137): [debug]: 1e+16 fp, 5.3e+09 fp/s, 1992545 s, 553h29m04s87
09:43:02 (137): [normal]: % CPU usage: 1.000000, GPU usage: 1.000000
command line: ../../projects/einstein.phys.uwm.edu/HSgammaPulsar_x86_64-pc-linux-gnu-opencl_v1.0 --inputfile ../../projects/einstein.phys.uwm.edu/LATeah4021L04.dat --alpha 0.943218186562 --delta 1.30995332125 --skyRadius 8.726650e-08 --ldiBins 30 --f0start 580.0 --f0Band 8.0 --firstSkyPoint 0 --numSkyPoints 1 --f1dot -1e-13 --f1dotBand 1e-13 --df1dot 1.413729381e-15 --ephemdir ../../projects/einstein.phys.uwm.edu/JPLEPH --Tcoh 2097152.0 --toplist 10 --cohFollow 10 --numCells 1 --useWeights 1 --Srefinement 1 --CohSkyRef 1 --cohfullskybox 1 --mmfu 0.1 --reftime 56100 --model 0 --f0orbit 0.005 --mismatch 0.1 --demodbinary 1 --BinaryPointFile ../../projects/einstein.phys.uwm.edu/templates_LATeah4021L04_0588_7466193.dat --debug 0 -o LATeah4021L04_588.0_0_0.0_7466193_0_0.out
output files: 'LATeah4021L04_588.0_0_0.0_7466193_0_0.out' '../../projects/einstein.phys.uwm.edu/LATeah4021L04_588.0_0_0.0_7466193_0_0' 'LATeah4021L04_588.0_0_0.0_7466193_0_0.out.cohfu' '../../projects/einstein.phys.uwm.edu/LATeah4021L04_588.0_0_0.0_7466193_0_1'
09:43:02 (137): [debug]: Flags: X64 SSE SSE2 GNUC X86 GNUX86
09:43:02 (137): [debug]: glibc version/release: 2.35/stable
09:43:02 (137): [debug]: Set up communication with graphics process.
EAH_SLEEP file found, value 0
kernel_compact 256 threads
kernel_raz 256 threads
kernel_ts_2_phase_diff_sorted 64 threads
kernel_prepare_power_toplist 256 threads
kernel_prepareSort 1024 threads
kernel_SortedPhoton 64 threads
kernel_setupPhotonPairsArray 64 threads
kernel_extractPhotonIndex 512 threads
Eah sleep true, 0
boinc_get_opencl_ids returned [0x5624648c6d20 , 0x5624648c6c50]
Using OpenCL platform provided by: NVIDIA Corporation
Using OpenCL device "NVIDIA GeForce RTX 4090" by: NVIDIA Corporation
Max allocation limit: 6347669504
Global mem size: 25390678016
OpenCL device has FP64 support
SemiCoh mode 0 start
skypoints(1)read_checkpoint(): Couldn't open file 'LATeah4021L04_588.0_0_0.0_7466193_0_0.out.cpt': No such file or directory (2)
skypoint loop(1)
S0:dpleph[initephem]: Cannot open file .405, result = 104
dpleph[state]: Time 2454683.289515 outside range of ephemeris
dpleph[state]: Time 2454683.289515 outside range of ephemeris
-- signal handler called: signal 1
9 stack frames obtained for this thread:
End of stcaktrace
09:43:03 (137): called boinc_finish(11)
</stderr_txt>
]]>
try detaching/resetting the
)
try detaching/resetting the project to force it to redownload all the setup files. and replace any of the special app files that got deleted.
the error message definitely points to a problem reading the JPLEPH.405 file. but I don't see any difference in how the stock app accesses this file and how this special app does it. they should be the same.
_________________________________________________________________________
I reset the project, made
)
I reset the project, made sure the project files were no longer on the system. Re-attached, running vanilla and it is running (without the new app).
I am going to deplete the few work units that downloaded, then try the modification again. I will try 0.95 first then go from there. Also, just so I make sure of this, the "run manager" file goes into the same location as the 5 kernels and EAH_sleep?