Troubleshooting Multiple gpu setups that use Riser cards

Ian&Steve C.
Ian&Steve C.
Joined: 19 Jan 20
Posts: 3681
Credit: 33830073441
RAC: 37745730

Navi cards do need to have

Navi cards do need to have PCIe atomics (according to the devs).

Make sure your slots are running at PCIe gen 3.0 (set it explicitly in the BIOS to be sure). I think a x8 slot should be fine though. you can always check for the atomics error too.

run the command "dmesg" in the terminal and look for a line like this:

kfd: skipped device 1002:7300, PCI rejects atomics

_________________________________________________________________________

Tom M
Tom M
Joined: 2 Feb 06
Posts: 5586
Credit: 7674039477
RAC: 1788433

Ian&Steve C. wrote: Navi

Ian&Steve C. wrote:

Navi cards do need to have PCIe atomics (according to the devs).

Make sure your slots are running at PCIe gen 3.0 (set it explicitly in the BIOS to be sure). I think a x8 slot should be fine though. you can always check for the atomics error too.

run the command "dmesg" in the terminal and look for a line like this:

kfd: skipped device 1002:7300, PCI rejects atomics

The EPYC is now on the workbench.  I was asked to send a pix of the socket to tech support. I see two possible "inconsistencies".  So I am suspecting the socket now.

Tom M

A Proud member of the O.F.A.  (Old Farts Association).  Be well, do good work, and keep in touch.® (Garrison Keillor)

Ian&Steve C.
Ian&Steve C.
Joined: 19 Jan 20
Posts: 3681
Credit: 33830073441
RAC: 37745730

Tom M wrote: The EPYC is now

Tom M wrote:

The EPYC is now on the workbench.  I was asked to send a pix of the socket to tech support. I see two possible "inconsistencies".  So I am suspecting the socket now.

Tom M

 

sounds like a good thing to check ;)

Ian&Steve C. wrote:

how'd the CPU pins look? any bent? do you recall? PCIe devices all connect right to the CPU and will hence have pin connections from the PCIe slots into the CPU socket.

_________________________________________________________________________

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.