Hello,
I've a similar problem, but with the S6Bucket tasks.
There are 4 computers, 3 Intel Macs and 1 Linux box.
The Linux box is receiving workunits, the Macs are run out of work.
The Mac Host-ids are 2500292, 1689413 and 1112358.
The Linux box has id 2140145.
In http://einstein.phys.uwm.edu/host_sched_logs/2500/2500292 I found that lines:
2011-10-23 12:48:00.5192 [PID=31118] Request: [USER#xxxxx] [HOST#2500292] [IP xxx.xxx.xxx.54] client 6.10.58
2011-10-23 12:48:00.5206 [PID=31118] [send] effective_ncpus 16 max_jobs_on_host_cpu 999999 max_jobs_on_host 999999
2011-10-23 12:48:00.5206 [PID=31118] [send] effective_ngpus 1 max_jobs_on_host_gpu 999999
2011-10-23 12:48:00.5206 [PID=31118] [send] Not using matchmaker scheduling; Not using EDF sim
2011-10-23 12:48:00.5206 [PID=31118] [send] CPU: req 345613.82 sec, 16.00 instances; est delay 0.00
2011-10-23 12:48:00.5206 [PID=31118] [send] CUDA: req 0.00 sec, 0.00 instances; est delay 0.00
2011-10-23 12:48:00.5206 [PID=31118] [send] work_req_seconds: 345613.82 secs
2011-10-23 12:48:00.5206 [PID=31118] [send] available disk 98.81 GB, work_buf_min 0
2011-10-23 12:48:00.5206 [PID=31118] [send] active_frac 0.999934 on_frac 0.997261 DCF 1.902272
2011-10-23 12:48:00.5212 [PID=31118] [send] [HOST#2500292] is reliable
2011-10-23 12:48:00.5212 [PID=31118] [send] set_trust: random choice for error rate 0.000010: yes
2011-10-23 12:48:00.5370 [PID=31118] [send] stopping work search - locality condition
2011-10-23 12:48:00.5371 [PID=31118] [send] stopping work search - locality condition
2011-10-23 12:48:00.5371 [PID=31118] [send] stopping work search - locality condition
2011-10-23 12:48:00.5387 [PID=31118] [debug] [HOST#2500292] MSG(high) No work sent
2011-10-23 12:48:00.5387 [PID=31118] [debug] [HOST#2500292] MSG(high) No work is available for Gravitational Wave S6 GC search
2011-10-23 12:48:00.5387 [PID=31118] [debug] [HOST#2500292] MSG(high) No work available for the applications you have selected. Please check your preferences on the web site.
2011-10-23 12:48:00.5387 [PID=31118] Sending reply to [HOST#2500292]: 0 results, delay req 60.00
2011-10-23 12:48:00.5390 [PID=31118] Scheduler ran 0.026 seconds
Our server code now (again) allows to skip the driver version check if the client doesn't report a driver version.
This may be "risky" as we may get more Client Errors because of the wrong driver version, but I think this is better than denying work for Clients that could do it.
I'm in the middle of a test, what I did was de-install BOINC and then downloaded the latest version and installed it. So far I am now getting Gravitational Wave 56 GC search 1.01 (SSE2) w/u's. Awhile ago I opted out of Gamma-ray pulsar search w/u's because of validation errors.
One issue I still see is that I am not getting MilkyWay@home w/u's on one computer and getting them on another. Not a big concern just curious as why this is happening.
All this started a couple a couple of weeks ago and just got worse.
Hi, after the first problem I reported here being solved on the server side, I am now having a different(!?) problem. This is the message I am getting:
2011-11-20 13:45:32.5595 [PID=12569] Request: [USER#xxxxx] [HOST#4142843] [IP xxx.xxx.xxx.237] client 6.12.26
2011-11-20 13:45:32.5620 [PID=12569] [send] effective_ncpus 8 max_jobs_on_host_cpu 999999 max_jobs_on_host 999999
2011-11-20 13:45:32.5620 [PID=12569] [send] effective_ngpus 1 max_jobs_on_host_gpu 999999
2011-11-20 13:45:32.5620 [PID=12569] [send] Not using matchmaker scheduling; Not using EDF sim
2011-11-20 13:45:32.5620 [PID=12569] [send] CPU: req 0.00 sec, 0.00 instances; est delay 0.00
2011-11-20 13:45:32.5620 [PID=12569] [send] CUDA: req 1.00 sec, 0.33 instances; est delay 0.00
2011-11-20 13:45:32.5620 [PID=12569] [send] work_req_seconds: 0.00 secs
2011-11-20 13:45:32.5620 [PID=12569] [send] available disk 23.80 GB, work_buf_min 0
2011-11-20 13:45:32.5620 [PID=12569] [send] active_frac 0.999916 on_frac 0.995222 DCF 1.000000
2011-11-20 13:45:32.5625 [PID=12569] [send] [HOST#4142843] is reliable
2011-11-20 13:45:32.5626 [PID=12569] [send] set_trust: random choice for error rate 0.000010: yes
2011-11-20 13:45:32.7230 [PID=12569] [version] Don't need CPU jobs, skipping version 101 for einstein_S6Bucket ()
2011-11-20 13:45:32.7230 [PID=12569] [version] Checking plan class 'SSE2'
2011-11-20 13:45:32.7233 [PID=12569] [version] reading plan classes from file '../plan_class_spec.xml'
2011-11-20 13:45:32.7233 [PID=12569] [version] Don't need CPU jobs, skipping version 101 for einstein_S6Bucket (SSE2)
2011-11-20 13:45:32.7233 [PID=12569] [version] no app version available: APP#16 (einstein_S6Bucket) PLATFORM#2 (windows_intelx86) min_version 0
2011-11-20 13:45:32.7250 [PID=12569] [debug] [HOST#4142843] MSG(high) No work sent
2011-11-20 13:45:32.7250 [PID=12569] [debug] [HOST#4142843] MSG(high) see scheduler log messages on http://einstein.phys.uwm.edu//host_sched_logs/4142/4142843
2011-11-20 13:45:32.7251 [PID=12569] Sending reply to [HOST#4142843]: 0 results, delay req 60.00
2011-11-20 13:45:32.7253 [PID=12569] Scheduler ran 0.172 seconds
I see that other participants have solved this problem by updating the Boinc manager. I would like to know if there is another solution since updating will bring other kind of problems. I had previously updated to this version and decided to revert back.
I would like to keep crunching for this project but am not receiving any work at the moment.
Help would be appreciated
Thanks
Hello, I've a similar
)
Hello,
I've a similar problem, but with the S6Bucket tasks.
There are 4 computers, 3 Intel Macs and 1 Linux box.
The Linux box is receiving workunits, the Macs are run out of work.
The Mac Host-ids are 2500292, 1689413 and 1112358.
The Linux box has id 2140145.
In http://einstein.phys.uwm.edu/host_sched_logs/2500/2500292 I found that lines:
2011-10-23 12:48:00.5192 [PID=31118] Request: [USER#xxxxx] [HOST#2500292] [IP xxx.xxx.xxx.54] client 6.10.58
2011-10-23 12:48:00.5206 [PID=31118] [send] effective_ncpus 16 max_jobs_on_host_cpu 999999 max_jobs_on_host 999999
2011-10-23 12:48:00.5206 [PID=31118] [send] effective_ngpus 1 max_jobs_on_host_gpu 999999
2011-10-23 12:48:00.5206 [PID=31118] [send] Not using matchmaker scheduling; Not using EDF sim
2011-10-23 12:48:00.5206 [PID=31118] [send] CPU: req 345613.82 sec, 16.00 instances; est delay 0.00
2011-10-23 12:48:00.5206 [PID=31118] [send] CUDA: req 0.00 sec, 0.00 instances; est delay 0.00
2011-10-23 12:48:00.5206 [PID=31118] [send] work_req_seconds: 345613.82 secs
2011-10-23 12:48:00.5206 [PID=31118] [send] available disk 98.81 GB, work_buf_min 0
2011-10-23 12:48:00.5206 [PID=31118] [send] active_frac 0.999934 on_frac 0.997261 DCF 1.902272
2011-10-23 12:48:00.5212 [PID=31118] [send] [HOST#2500292] is reliable
2011-10-23 12:48:00.5212 [PID=31118] [send] set_trust: random choice for error rate 0.000010: yes
2011-10-23 12:48:00.5370 [PID=31118] [send] stopping work search - locality condition
2011-10-23 12:48:00.5371 [PID=31118] [send] stopping work search - locality condition
2011-10-23 12:48:00.5371 [PID=31118] [send] stopping work search - locality condition
2011-10-23 12:48:00.5387 [PID=31118] [debug] [HOST#2500292] MSG(high) No work sent
2011-10-23 12:48:00.5387 [PID=31118] [debug] [HOST#2500292] MSG(high) No work is available for Gravitational Wave S6 GC search
2011-10-23 12:48:00.5387 [PID=31118] [debug] [HOST#2500292] MSG(high) No work available for the applications you have selected. Please check your preferences on the web site.
2011-10-23 12:48:00.5387 [PID=31118] Sending reply to [HOST#2500292]: 0 results, delay req 60.00
2011-10-23 12:48:00.5390 [PID=31118] Scheduler ran 0.026 seconds
Any help is welcome.
Switching to BOINC 6.12.35
)
Switching to BOINC 6.12.35 solved the problem.
Thanks for the info,
)
Thanks for the info, Richard.
Our server code now (again) allows to skip the driver version check if the client doesn't report a driver version.
This may be "risky" as we may get more Client Errors because of the wrong driver version, but I think this is better than denying work for Clients that could do it.
BM
BM
Have not received any w/u's
)
Have not received any w/u's for several weeks now, yet no messages stating none are available.
I am getting the same
)
I am getting the same messages of no work available for S6 GC search on my Intel iMac running OSX 10.4 and BM 6.13.6
Billy
I'm in the middle of a test,
)
I'm in the middle of a test, what I did was de-install BOINC and then downloaded the latest version and installed it. So far I am now getting Gravitational Wave 56 GC search 1.01 (SSE2) w/u's. Awhile ago I opted out of Gamma-ray pulsar search w/u's because of validation errors.
One issue I still see is that I am not getting MilkyWay@home w/u's on one computer and getting them on another. Not a big concern just curious as why this is happening.
All this started a couple a couple of weeks ago and just got worse.
All issues resolved after
)
All issues resolved after BOINC update.
Hi, after the first problem I
)
Hi, after the first problem I reported here being solved on the server side, I am now having a different(!?) problem. This is the message I am getting:
2011-11-20 13:45:32.5595 [PID=12569] Request: [USER#xxxxx] [HOST#4142843] [IP xxx.xxx.xxx.237] client 6.12.26
2011-11-20 13:45:32.5620 [PID=12569] [send] effective_ncpus 8 max_jobs_on_host_cpu 999999 max_jobs_on_host 999999
2011-11-20 13:45:32.5620 [PID=12569] [send] effective_ngpus 1 max_jobs_on_host_gpu 999999
2011-11-20 13:45:32.5620 [PID=12569] [send] Not using matchmaker scheduling; Not using EDF sim
2011-11-20 13:45:32.5620 [PID=12569] [send] CPU: req 0.00 sec, 0.00 instances; est delay 0.00
2011-11-20 13:45:32.5620 [PID=12569] [send] CUDA: req 1.00 sec, 0.33 instances; est delay 0.00
2011-11-20 13:45:32.5620 [PID=12569] [send] work_req_seconds: 0.00 secs
2011-11-20 13:45:32.5620 [PID=12569] [send] available disk 23.80 GB, work_buf_min 0
2011-11-20 13:45:32.5620 [PID=12569] [send] active_frac 0.999916 on_frac 0.995222 DCF 1.000000
2011-11-20 13:45:32.5625 [PID=12569] [send] [HOST#4142843] is reliable
2011-11-20 13:45:32.5626 [PID=12569] [send] set_trust: random choice for error rate 0.000010: yes
2011-11-20 13:45:32.7230 [PID=12569] [version] Don't need CPU jobs, skipping version 101 for einstein_S6Bucket ()
2011-11-20 13:45:32.7230 [PID=12569] [version] Checking plan class 'SSE2'
2011-11-20 13:45:32.7233 [PID=12569] [version] reading plan classes from file '../plan_class_spec.xml'
2011-11-20 13:45:32.7233 [PID=12569] [version] Don't need CPU jobs, skipping version 101 for einstein_S6Bucket (SSE2)
2011-11-20 13:45:32.7233 [PID=12569] [version] no app version available: APP#16 (einstein_S6Bucket) PLATFORM#2 (windows_intelx86) min_version 0
2011-11-20 13:45:32.7250 [PID=12569] [debug] [HOST#4142843] MSG(high) No work sent
2011-11-20 13:45:32.7250 [PID=12569] [debug] [HOST#4142843] MSG(high) see scheduler log messages on http://einstein.phys.uwm.edu//host_sched_logs/4142/4142843
2011-11-20 13:45:32.7251 [PID=12569] Sending reply to [HOST#4142843]: 0 results, delay req 60.00
2011-11-20 13:45:32.7253 [PID=12569] Scheduler ran 0.172 seconds
I see that other participants have solved this problem by updating the Boinc manager. I would like to know if there is another solution since updating will bring other kind of problems. I had previously updated to this version and decided to revert back.
I would like to keep crunching for this project but am not receiving any work at the moment.
Help would be appreciated
Thanks
Anyone else having this
)
Anyone else having this problem might want to have a look at this:
http://einsteinathome.org/node/196072&nowrap=true#115011